Reddog
RCTalk Champion
Well I have been running my maxx without issue sense repairing the back plate. Now it smokes and sounds like it is rich however if you lean it out it gets hot and will not run. Performance is WAY down, at time barely able to move and sounds like crap. Note that it was running great after the repair then from one tank to the next it all went down hill. Literally that fast. I first thought that I had got something in it when I added fuel so I cleaned out the tank, lines and even pulled the card and cleaned it out as well. I put a new o-ring on and put everything back together. Still running like a bad tune. Almost like it is lean on the bottom and rich on top. So I opened the LSN and closed the top a little. Result, NO POWER at all!!
Syntoms are: No power, hot at times, hard starting, will not idle. Now I leaned out the bottom again andd got some power but will not idle.
Have I just wore this thing out? It does have at least 15 gallons through it. And I got it used. Not very often one of these things stumps me like this but when it does it is good. Of course it could be that I am working 60 hours a week and am tired enough that I am missing something really simple here to.
Thank You all, Shaun
Syntoms are: No power, hot at times, hard starting, will not idle. Now I leaned out the bottom again andd got some power but will not idle.
Have I just wore this thing out? It does have at least 15 gallons through it. And I got it used. Not very often one of these things stumps me like this but when it does it is good. Of course it could be that I am working 60 hours a week and am tired enough that I am missing something really simple here to.
Thank You all, Shaun