Any ideas what I can use to clean in the a arm hinge holes? There’s dust in them and they are squeaking so I’m trying to clean them out. Q-tip is to large.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Oh good idea I totally forgot about thoseTry pipe cleaners.
View attachment 130603
dint he say Q tips wont work..Can also use a q-tip. With alcohol. Or can use tiny precision 3mm files
Like these or different types
https://www.amazon.com/dp/B07D12D36D/ref=cm_sw_r_cp_apa_glt_fabc_RM6YB1Z6R4D2TMKJQ875
Yeah. A q-tip is a bit over 3mm.dint he say Q tips wont work..
They will work in a 4mm bore, but not in the 3mm if that is what he has. My q-tips have always been right around 3.5mm. Don't ask me how I know this lol.As regards to Q-tip. Did you try and pull some of the cotton off to make it smaller. Yes the fcotton ball is to big to fit your correct. Doesn't mean he can't pull some off to make it fit. The little stick can be bigger then 3mm
I was just thinking I wish I was home to measure one...They will work in a 4mm bore, but not in the 3mm if that is what he has. My q-tips have always been right around 3.5mm. Don't ask me how I know this lol.
I used a Benford model 4603 gas chromatograph series 3 tenth reading carbide faced digital micrometer to measure mineI was just thinking I wish I was home to measure one...
That's a mouth full and very precise at least we know it's 3.5 now good research budI used a Benford model 4603 gas chromatograph series 3 tenth reading carbide faced digital micrometer to measure mine