jayeff
RC Newbie
- Messages
- 1
- Reaction score
- 0
Hi,
I am new to the RC hobby and did some reading on LiPo batteries before taking the plunge.
I am using a new 2S LiPo 3250mAh Voltz battery which I took the IR readings of both cells after purchasing (at storage voltage 3.8v per cell). The readings were as follows:
12.6mΩ and 13.6mΩ
(thought these were a little high to start with)
After only two charge cycles these values are now reading the following (again at storage voltage 3.8v per cell):
22.6mΩ and 23.6mΩ
Should I be concerned that the IR values have risen this amount after only two charge cycles?
Any advise would be appreciated. Thanks.
I am new to the RC hobby and did some reading on LiPo batteries before taking the plunge.
I am using a new 2S LiPo 3250mAh Voltz battery which I took the IR readings of both cells after purchasing (at storage voltage 3.8v per cell). The readings were as follows:
12.6mΩ and 13.6mΩ
(thought these were a little high to start with)
After only two charge cycles these values are now reading the following (again at storage voltage 3.8v per cell):
22.6mΩ and 23.6mΩ
Should I be concerned that the IR values have risen this amount after only two charge cycles?
Any advise would be appreciated. Thanks.
Last edited: