kwong2001
Hardcore RCTalk User
I have for sale my pride and joy, it's a Team Associated Nitro TC3 Team Kit Version 1. I'm selling the car so i can buy Koni Struts for the REAL car.
See pictures and description below. Asking Price is $520 Shipped OBO I accept Paypal and Money Orders
======================================================
Hop-ups include:
Golden Horizon Chassis
Factory Team Dual Champer Rear Exhaust
Factory Team Graphite Radio Tray
Factory Team Rear Sway Bar
Factory Team Carbon Kit
Factory Team Light Weight One-way Hub
Factory Team Titanium Pivot Balls (uninstalled, 7 total one broke)
Factory Team Blue Alum. Center Bulkhead
Blue Aluminum Anodized Shock End Caps (uninstalled)
Foam Tires
The hop-up list is what I can visually see. I did buy the car new, but I stopped upgrading the a few years ago and can't remember if there's anything i missed.
======================================================
Electronics:
Lynx 3D Computer Radio (3 channel)
Futaba FP-314B Servo (throttle)
Cirrus CS-71std. (steering)
KO Propo FSA-1 Failsafe
Venom Speed Meter
Only things wrong with the radio is with the part the antenna screws onto, it stripped out for some reason. Also, the little thing that makes it so you can turn the steering wheel past a certain point has broken off, but it's only on one direction. Both things are very minor, and most people would never notice it to begin with Other than that, it's in good condition.
The servos are admittedly generic servos. Whatever was laying around the house, that's what I put in the car. The Failsafe is supposed to be one of the best on the market. The Venom Speed Meter was one of the first production. The install pictures on Venom's website were the ones of my car, so I probably was one of the first to install a VSM in a ntc3.
======================================================
Engine:
Novarossi NS12S3 (1.52hp)
Motorsaver Airfilter
The engine does not have huge top end power. It's much at home in the low-mid range. It can rev comfortably to about 32,000-33,000 rpm's, anything past that and it'll start to overheat. As a result, I would recommend keeping the car on a short track where you wouldn't break more than about 52mph. The engine can rev higher, up to 36,000ish, but it would have to be tuned differently compared to racing conditions, and temperatures would be a bit higher.
Because the engine is a race engine, it does tend to be a bit more sensitive to tuning, I would not recommend, nor will I sell the car to a novice tuner. The engine does need to be idled up to 150-160 degrees before operating or tuning. Normal operating temperature is in the 200-220 degree range.
The engine has about 2 gallons of fuel in total. I had OS Rocket pinch the sleeve, and it's had about a half gallon since. Compression is good.
======================================================
Bodies:
Protoform Honda Accord 2-Door
HPI BMW M3 w/LED headlights
HPI Toyota Supra
The Honda body is in great condition. The front end has one crack and a few tiny scuff marks, while one wheel well has a crack.
The BMW body was the first body I used on the car, so it's pretty scratched up, it's still good, but it's seen abuse. The rear spoiler broke off awhile ago, and the car was undriveable without the downforce, so i did some ghetto fabulous repair. The body comes with some LED lights which are great for driving at night.
The Supra body is also not in the best of shape at least by my standards. But it is a good basher body especially in less prepared parking lots.
======================================================
Miscellaneous:
OFNA Starter Box with upgraded Team Orion 15T motors
BIG bag of parts.
The OFNA Starter box has had it's motors upgraded to Team Orion 15T Mod motors. It can turn over the novarossi with ease provided the 12V battery is fully charger. I will provide a 12 wall charger with the starter box.
I have a bunch of parts for the car. Mainly a-arms, diff housings, chassis braces, a bunch of carbon parts including a carbon radio tray, couple fuel tanks, side exhaust header and both high-rpm and stock pipe. I also have the stock chassis, but it admittedly is pretty scratched up, and shows evidence of me dremeling screws out. Although it still works and is not bent up or anything.
Asking Price is $520 Shipped OBO I accept Paypal and Money Orders
Last edited: