SKIP
RCTalk Talkaholic
- Messages
- 272
- Reaction score
- 0
- RC Driving Style
So I have always wanted to build a crawler.. and I have made 3 tube chassis, and I have both TXT-1 and Mad Force axles.. The Chassis I have made look good but when it comes down to mounting everything up I get stuck in a posission that I can't get around.. Shocks hitting the servo, lings binding up.. ect.. So I have some experince with CAD and thought that I could design there, anb see what kind of issues I can solve with this.. Here you can see interfacing issues of parts and see how much room you have... whatever.. By moving the parts around I can see if it would work here and there... As long as everything is to scale it should work.. So here is the set up I am going with.. all the drawings are to scale.. within .030" or so... I had the tube chassi done and the comp crashed and I lost all of it.. Thats a lesson learned hard cuz I had 4 hours into it at that moment.. I now back everything up on a disk as I go..
Mad force axles, emaxx tranny, narrowed jumbo kongs, savage shocks, AL heim joints, and a tube chassis..
Next is link mounts, upper links and mounts, and chassi...
Mad force axles, emaxx tranny, narrowed jumbo kongs, savage shocks, AL heim joints, and a tube chassis..
Next is link mounts, upper links and mounts, and chassi...