tuning

I really need some help tuning. Granted i am in connecticut and it is cold. I can pretty much get it dialed in at WOT, but i am having a hard time with the idle. no matter what i do, i can't get the rpms down with stalling, or with it moving forward at idle. today it was running...

I Recently fitted a brand new complete carb to my 2.5 Revo engine and now i'm having tuning problems. I installed the carb with the settings un-touched to see if would fire ok, but no go, so tuned to the settings of the old carb, those being 4 3/4 out on the HSN and flush on the LSN. While it...

When I pinch my fuel line to cut my 2.5 off it revs up like crazy! Is this good or bad what nobs do i need to mess with HSN LSN or idle? Also a good amout of fuel spray and smoke is coming out of the pipe but she runs like a bat with this setting.

i just had a quick question does anyone know what the almost perfect tuning for a tmaxx 3.3 is? it is also about 40 degres here

i have a 2.5 with the 3.3 on it and it runs fine until it gets to runnin temps. then it starts bogging but if i slowly get it up to speed when it gets into 2nd gear its fine. am i runnin too rich? thanks

Hey i have the new t-maxx 3.3 i bought like 2 weeks ago. i broke it in using the instructions in the video and have put over a half a gallon of fuel thru it and it seems like my engine is still either not broken in fully or not tuned right. I've been running it every day as much as i can to see...

This is the way that I tune engines, there are many other ways to tune but I figured this is the most simple way to do it so I will share my info. This technique is for a fully broken in engine that is ready for a full performance tune. This tuning procedure will set your needles where they need...

I bought a used 2.5 Maxx that I have been tweaking on daily for a while now. It's a powerful machine, a real wheelie king on both grass and tarmac. I keep it tuned a bit rich as I'm not a top performance junkie yet. The truck was only broken in then put in storage for a year before I bought it...

I have a nitro rc OFNA .15 force engine. It has been sitting in my garage for the past 8 years, and now decided to make it work. New glow plug, igniter and charger and fuel of course. The needles are out of whack, and set them to factory settings. But on the facrory settings it will not start...

so, ah, I bought a cheapo 2 stroke, 30cc, rear wheel drive "monster truck" 1/5 scale of course. now, it starts, but will just die when its meant to be idling, or you'll start driving along long grass, and it gets stuck, as in, you're WOT, but its not moving! now, I'm sure the carby...