thatcraig
RCTalk Talkaholic
My servo is only steering to the right, I've centered the horn, and centered the controller setting to the middle setting, and still the servo only wants to steer to the right. Can anyone tell me what to check?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Hard to give a good diagnosis based on that. Can you upload a vid to YT? Put the controller in the shot and turn the wheel.My servo is only steering to the right, I've centered the horn, and centered the controller setting to the middle setting, and still the servo only wants to steer to the right. Can anyone tell me what to check?
Problem is in the the video it looks like everything is working fine.Hard to give a good diagnosis based on that. Can you upload a vid to YT? Put the controller in the shot and turn the wheel.
What radio?Problem is in the the video it looks like everything is working fine.
The servo horn isn't turning all the way, and I have to set the trim all the way to full just to get it to steer alil to the left an and it turns alot to the right.
Wondering if the endpoint adjustment is off. As if he turned the dual rate knob by accident. On certain radios that is how you adjust the endpoints.do you have another servo to test? Id say servo is culprit not radio
If you have another servo you can plug in and test, as tntpoof said, try that. If not, follow this and see if it helps.Dx3 radio
I can adjust the radio and get alil more steering out of it, so do you think its the endpoints?
Let me know. I'm curious.Thanks for the video, ill do that tomorrow. And I bet that will fix it.