islandlife
RCTalk Talkaholic
- Messages
- 262
- Reaction score
- 528
- RC Driving Style
- Bashing
- Racing
- Crawling
- Thread starter
- #41
Picked up some shocks off jenny’s rc from a losi tenacity db. Running the stock pro4 springs.
Had to 3d print some tpu bushings for the top mount, bottom was a direct fit.
They are about 6mm shorter fully extended than the stock shocks, and the same length as stock compressed. Also 3.5mm shock shaft vs 3mm
Also, put the pro4 and wide senton on the scale. Pro4 came in at 6.42 lbs with 5600mah 2s, wide senton came in at 8.0 lbs with same battery
Had to 3d print some tpu bushings for the top mount, bottom was a direct fit.
They are about 6mm shorter fully extended than the stock shocks, and the same length as stock compressed. Also 3.5mm shock shaft vs 3mm
Also, put the pro4 and wide senton on the scale. Pro4 came in at 6.42 lbs with 5600mah 2s, wide senton came in at 8.0 lbs with same battery
Last edited: