islandlife
RCTalk Talkaholic
- Messages
- 262
- Reaction score
- 528
- RC Driving Style
- Bashing
- Racing
- Crawling
I've made some posts in the “tekno sct410 2.0” thread about building this kit, but i thought i would start a dedicated thread.
I jumped on pre-ordering this kit when the announced it, as i was already looking for a used sct410.3 or SL.
I like to do most of my rc wrenching with my 4 year old “helping”, and we had a lot of fun building an axial capra kit, so a new sct that comes in kit form sounded like a good project for us!
Unfortunately i did not take a ton of pics through the build, but ill update this thread moving forward with any changes or upgrades.
We are almost done the build at this point, just have to shorten the motor leads and change the esc plug to ec5. (140a HW max10 esc comes with a xt60?? Seems to small to me).
Was planning on using some tires/wheels and servo that i had on hand, but the +3 wheels for my AE pro4 rub slightly on the body and the servo i was planning on was too tall to fit without spacers. So i broke down and bought new stuff.
Heres the build as it sits today:
-Tekno sct410 2.0 kit
-Hobbywing 140a max10 G2 sensored esc
-Hobbywing 3665 3200kv g3 sensored motor
-Apex RC 17-20t mod1 pinions (18t installed)
-Tekin T250 servo (in the mail)
-Tekno short course wheels (in the mail)
-Jconcepts chopper tires (in the mail)
-Proline Flotek fusion body
-Scorched RC inner fenders (for arrma senton, cut to fit)
-Flysky gt5 radio and reciever
-CNHL 5600mah 2s batteries
More pics to come shortly
I jumped on pre-ordering this kit when the announced it, as i was already looking for a used sct410.3 or SL.
I like to do most of my rc wrenching with my 4 year old “helping”, and we had a lot of fun building an axial capra kit, so a new sct that comes in kit form sounded like a good project for us!
Unfortunately i did not take a ton of pics through the build, but ill update this thread moving forward with any changes or upgrades.
We are almost done the build at this point, just have to shorten the motor leads and change the esc plug to ec5. (140a HW max10 esc comes with a xt60?? Seems to small to me).
Was planning on using some tires/wheels and servo that i had on hand, but the +3 wheels for my AE pro4 rub slightly on the body and the servo i was planning on was too tall to fit without spacers. So i broke down and bought new stuff.
Heres the build as it sits today:
-Tekno sct410 2.0 kit
-Hobbywing 140a max10 G2 sensored esc
-Hobbywing 3665 3200kv g3 sensored motor
-Apex RC 17-20t mod1 pinions (18t installed)
-Tekin T250 servo (in the mail)
-Tekno short course wheels (in the mail)
-Jconcepts chopper tires (in the mail)
-Proline Flotek fusion body
-Scorched RC inner fenders (for arrma senton, cut to fit)
-Flysky gt5 radio and reciever
-CNHL 5600mah 2s batteries
More pics to come shortly
Last edited: