Traxxas
RCTalk Rookie
- Messages
- 16
- Reaction score
- 3
Does anyone know where I can find A aluminum frame for a Traxxas slash
Welcome to RCTalk
Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
Nicks RC
RC Newbie
- Messages
- 6
- Reaction score
- 2
Yeah amain has one for the rally but if fits the lcg slash too
- Messages
- 5,986
- Reaction score
- 9,916
- Location
- Baltimore
- RC Driving Style
- Bashing
- Racing
- Crawling
- Scale Builder
2wd or 4x4?
For 2wd, integy has a aluminum chassis. The nitro slash has a aluminum chassis. The nitro slash one could fit the electric one. You would just need the transmission the other way and a new steering plate.
Wondering why you are going with aluminum chassis? The plastic LCG chassis, I had no issues with. Even with the stock HCG never had any issues with that.
There are carbon fiber ones too on AMain.
For 2wd, integy has a aluminum chassis. The nitro slash has a aluminum chassis. The nitro slash one could fit the electric one. You would just need the transmission the other way and a new steering plate.
Wondering why you are going with aluminum chassis? The plastic LCG chassis, I had no issues with. Even with the stock HCG never had any issues with that.
There are carbon fiber ones too on AMain.
Chubaka
RCTalk VIP
Supporter
Excellence Award
- Messages
- 6,087
- Reaction score
- 10,649
- Location
- Jurassic Park
- RC Driving Style
- Bashing
- Crawling
- Scale Builder
Fast lane machine
There used to rem, but looks like they went under.
https://www.fastlanemachine.net/
http://racersedgemachine.com/Slash.html
There used to rem, but looks like they went under.
https://www.fastlanemachine.net/
http://racersedgemachine.com/Slash.html
Last edited:
Bogda89
RCTalk Talkaholic
- Messages
- 376
- Reaction score
- 270
There is one guy on YouTube who made lcg alu chassis conversion from nitro slash. That's is not a lot of modifications needed. If you want I can search for that video. It should be less than 40$, if you buy chassis from eBay that sometimes go super cheap like 5$, 10$, it would be even less.
Only modification that you have to make is either cut an inch from the chassis, or Dremel a lip on the plastic gearbox housing
