- Messages
- 6,136
- Reaction score
- 10,210
- Location
- Baltimore
- RC Driving Style
- Bashing
- Racing
- Crawling
- Scale Builder
Found this on FB.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
True. On my slash 2wd I run normal rear motor / tranny, I only have 2 screws which are connected to the trans case, there is supposed to be 2 other screws that are connected on top of the chassis, which I don't run those since the plastic stripped out, and so far it's been running ok (I'm running RPM shock towers btw)OK. This is cool.
But the thing that bothers me is that there’s no support for the back of the shock tower.
Haven't seen him in a while.I think that WickedFog would 3D print some sort of support.
one guy used a camber link.OK. This is cool.
But the thing that bothers me is that there’s no support for the back of the shock tower.
I’ll have to see this.one guy used a camber link.
look at the pics david posted. if you look close enough you see camber links on the chassis.I’ll have to see this.
yesWould they be under Nitro Rustler 2.5?
That's how we did back in the day. My boys bandit on slash wheels was quick from a dig.
Looks like tmaxx.