Welcome to RCTalk
Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
Tunedfrog
Kermit the frog is a sissy.
Supporter
Military Veteran
Hospitality Award
Build Thread Contributor
What part of it is binding on the screw? From your pics I can't really tell.
If anything, it looks like the links on the bottom should be turned up. I may be wrong.
If anything, it looks like the links on the bottom should be turned up. I may be wrong.
WickedFog
Starter of too many projects
Supporter
Excellence Award
Hospitality Award
Rig of the Month Winner
Build Thread Contributor
- Messages
- 14,953
- Reaction score
- 21,194
- Location
- Terre Haute, IN
- RC Driving Style
- Bashing
- Crawling
- Scale Builder
Need more light under there to get a better pic. Can't see what's going on.
The tie rod (lower link) could be on upside down, but I cannot tell without seeing different angle. You have 3 pics, all taken from relatively the same angle.
The steering link from the servo to the knuckle is at a really steep angle. If it were me I would source some andled end links to fix that a bit.
Take a few more pics with a light shining under there, and from other angles.
The tie rod (lower link) could be on upside down, but I cannot tell without seeing different angle. You have 3 pics, all taken from relatively the same angle.
The steering link from the servo to the knuckle is at a really steep angle. If it were me I would source some andled end links to fix that a bit.
Take a few more pics with a light shining under there, and from other angles.
- Messages
- 9,272
- Reaction score
- 16,610
- Location
- Central California
- RC Driving Style
- Bashing
- Crawling
- Scale Builder
- Flying
Don't know if these will help, these are what it should look like.
