Welcome to RCTalk
Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
coldvod
RCTalk Talkaholic
No. tried it and it peels.
- Messages
- 6,027
- Reaction score
- 10,004
- Location
- Baltimore
- RC Driving Style
- Bashing
- Racing
- Crawling
- Scale Builder
No. regular spray paint would fade / chip away. For RC Lexan bodies you need RC paint, or polycarbonate paint. I used / use Duratrax with no issues. Tamiya and Traxxas are also good brand paints.
ProLine has paints too, but they are liquid and more for like airbrush painting instead of rattle can.
Before painting, make sure to clean the inside of the body, wipe it down, and use some alcohol, and then it should be ready, do this so the paint has something to stick / adhere too.
ProLine has paints too, but they are liquid and more for like airbrush painting instead of rattle can.
Before painting, make sure to clean the inside of the body, wipe it down, and use some alcohol, and then it should be ready, do this so the paint has something to stick / adhere too.
thatcraig
RCTalk Talkaholic
- Thread starter
- #4
Alright thanks for the rep!y
- Messages
- 959
- Reaction score
- 1,459
- Location
- Idaho falls, ID
- RC Driving Style
- Bashing
- Crawling
- Scale Builder
- Flying
I have actually had luck with rustoleum 2x stuff. It does stick, just do light coats because it’s a thick paint
The black was a spazstix, the gray was also rustoleum. The windows are tinted with Tamiya tint. It will chip where it’s not backed up with some goo, like ANY polycarb paint. You can see right behind the front wheel well where some gray is missing, and down below where the spaz chipped off. 2 different paints unprotected by some flex paste chipped/cracked away.
The big disadvantage is the lack of colors, such as pearly or fluorescent stuff, or the color you want may not be in store.
some rustoleum grey and red on the 1/24
The black was a spazstix, the gray was also rustoleum. The windows are tinted with Tamiya tint. It will chip where it’s not backed up with some goo, like ANY polycarb paint. You can see right behind the front wheel well where some gray is missing, and down below where the spaz chipped off. 2 different paints unprotected by some flex paste chipped/cracked away.
The big disadvantage is the lack of colors, such as pearly or fluorescent stuff, or the color you want may not be in store.
some rustoleum grey and red on the 1/24
Last edited:
