WVNed
Vroom Vroom
Is yours a pull start or a bump start engine?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
cbaker65, Thank you, found on Ebay, $8.50+ $3.00 shipping, just ordered, we will see if it works?
cbaker65 bump
https://img2.associatedelectrics.com/pdf/cars_and_trucks/shared/cutcrank.pdf
the write up from ae regarding cutting cranks down, slightly different but similar principal though.
the rotostart housing?What is the black thing under the exhaust manifold in the picks. I have been wondering.
if you are using the stock flywheel, you will most likely be stuck with using the stock OE pilot shaft. you might be able to make one from another model work (for example the HPI one you posted, or even one of the cheap HSP ones), but with how the flywheel is set up it may or may not work. if you get a new flywheel, pilot shafts are for the most part universal, but can be affected by the clutch setup you plan on using (i.e. clutch shoes).cbaker65, D3MON, Thanks for the link! I saw that one( like I said, I have been searching this for weeks), just didn't know about the pilot shaft that you need to screw on to make it all fit and hold the collet correctly.
there are 3 main styles of crankshafts for surface nitros,D3MON, 2 of my 4 flywheels are LOSI from the xxx nt. 1 I have know idea, the other is a Traxxas I just got for another motor and the shaft on that one is way smaller then the other 3.