LegoMyEego
RC Newbie
- Messages
- 10
- Reaction score
- 1
This is the info on my esc and motor I'm wondering if I can use a 4s battery on it with out faying anything ??
Watts: 900W / Max voltage: <12V
Max Amps: 75A / KV(RPM/Volt): 4300KV
Max RPM: 50000 /Diameter: 36mm
Length: 50mm / Shaft length: 15mm
Shaft diameter: 3.175mm
Plug type: 4mm golden banana plug
ESC Specifications:
Continue current: 60A
Burst current: 320A
Battery: 2S Li-Po / 4S Ni-Mh Ni-Cd
BEC output: 5.5V / 3A
Power supply plugs: T plug male
Motor plugs: 4mm banana plug female
Dimension: 50 * 35 * 34mm / 2.0 * 1.4 * 1.3in (without cables
Watts: 900W / Max voltage: <12V
Max Amps: 75A / KV(RPM/Volt): 4300KV
Max RPM: 50000 /Diameter: 36mm
Length: 50mm / Shaft length: 15mm
Shaft diameter: 3.175mm
Plug type: 4mm golden banana plug
ESC Specifications:
Continue current: 60A
Burst current: 320A
Battery: 2S Li-Po / 4S Ni-Mh Ni-Cd
BEC output: 5.5V / 3A
Power supply plugs: T plug male
Motor plugs: 4mm banana plug female
Dimension: 50 * 35 * 34mm / 2.0 * 1.4 * 1.3in (without cables