Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I would say to get someHi guys! I burned my motor up on my sledge due to a front bearing failure, I’m gonna buy a new motor but don’t have a lot of extra money and want to go ahead and replace the factory bearings with some better ones. Any thoughts? Thanks in advanced
I would say to get some
Fast Eddy Bearings. If your going to rebuild the motor. I wouldn't put what traxxas sells back in it.
You will need to messure the bearing. That is in there to make sure you get rite size. This is what most guys would run..
https://www.fasteddybearings.com/traxxas-sledge-sealed-bearing-kit/
Thanks man, I’ll check these out definitely not putting the traxxas ones back in, they went out after about 20 or so packs ran through itI would say to get some
Fast Eddy Bearings. If your going to rebuild the motor. I wouldn't put what traxxas sells back in it.
You will need to messure the bearing. That is in there to make sure you get rite size. This is what most guys would run..
https://www.fasteddybearings.com/traxxas-sledge-sealed-bearing-kit/
Maybe 25Thanks man, I’ll check these out definitely not putting the traxxas ones back in, they went out after about 20 or so packs ran through it
Wow really that's crazy. Yea I love traxxas vehicles. But their electronics suck completely. Would definitely pick up some FastEddys..Maybe 25