Hey
Just wondering in my Losi ten t car there is a really small box to keep the battery sence there is loads of other cables and stuff inside it also, so its really hard to close the box and to actually keep the battery inside the box before driving.
Would it be possible to add an extra...
Hi,
Can anyone tell me how to use the x treme charger x80 touch? I'm charging 2 batteries of 7.4V and 5000mah, it just doesn't seem to stop charging, i dont understand it, must I double the Volts or mah to 10000mah and 14.8V? I can charge 3 hours and it doesn't seem to stop, does anyone no what...
Hi
I have a V2 Starterbox with Twin-motor for 1:8-1:10 and I have a 3.5 hpi trophy buggy bit might get a 1:10 on road soon. I was wandering volts and amhere (rpm I gues) suits the car best? the starter box company reccomends a 11.1v lipo. But I hav a 20 year old 7.2 charger. Is it worth it to...
I haven't been keeping up with my batteries for quite a while and today I decided to revive a couple of Tenergy 7.2v 3800mAh NiMh packs. The first one showed a low reading on my Super Brain 977 and took a charge with no problem. The other matching pack only read 0.00 and when I hit "Charge" it...
having owned nitro cars fopr a while I have just gone a brought a n electric car. can someone tell me the difference in the battery's the one that has come with it is a 3800mah! but I see there are different 'mah' sizes! what is the difference and can any size be used
many thanks
I've been a big fan of Eneloop rechargeable batteries for a while now. They not only offer great capacity at 2000mAh, but are capable of holding 70% of their charge over 5 years! To top it off, the latest 4th generation Panasonic Eneloops are able to be recharged 2,100 times!
Click to continue
The battery jump pack i bought has a lead that plugs directly into the reciever but it has the wrong lead to pluginto the on/off switch. can i snip the wires and splice them with the lead from my stock AA reciever pack without compromising the voltage from the battery to the reciever? should i...
i bought some cheap rechargeable AA batteries on Ebay, i charged them and put them in the reciever and controller and after a half tank of gas my throttle and steering were acting funny almost like radio interference. i would turn the wheel and the throttle would burst open and the servo was...
These are all the lipo chargers I either currently own or used to own over the course of my stint in RCs. I'll list both the specs and my thoughts on each.
iMax B6 Clone
Input Voltage: 11~18v
Circuit power: Max Charge: 50W / Max Discharge: 5W
Charge Current Range: .1~5.0A
Discharge current...
As the title says I'm looking for 3000-5000 8.4 volt NIMH batteries. If any of you guys have NIMH batteries laying around if you have converted to LIPO. I will be happy to pay something for them including the shipping cost. They must hold a charge I don't need paper weight's. Thanks
Hello again, I am looking for a good but under £20 Nimh 4 cube battery pack that's at least 6.0v preferably 7.2v.
just to make it clear:
I AM STAYING AWAY FROM LIPO'S NO MATTER HOW "SAFE" OR "EASY TO USE" THEY MAY BE.
Also just to make it clear again:
it has to look like this: oo...
Hey, guys I was about to order another lipo charger since my barely used onyx 235 got up and walked away, seriously I've turned my house upside down, looked in every packing box, and still no charger.....I might have thrown it out by accident.
This the brand I'm looking into, since it's free...
My latest video! its a remake of one of my really early videos on how to convert a PC power supply so you can use it to power your lipo chargers. The old video had poor video and audio quality and the walkthrough itself isnt as coherent as this time around :)
Parts you will need:
10W 10Ohm...
does any one know of a good quality quad charger that will cycle lipos?
Also, I've heard that the Hitec X4 will cycle lipos but I can't seem to confirm this. Does anyone have an X4 that can confirm?
I know it sounds bad that I can't do this but its actually really difficult...
I have a 1:16 scale RC Nitro Exceed RC Thunderfire truck and I'm having a hard time putting the batery compartment together... NOTHING FITS IN THAT THING!
If you can help that would be great, i can get a picture if you...
Revolectrix has a whole host of power calculators for not only their LiPo chargers but also a generic one as well. It can be a really handy tool to have so I thought Id share. Theyve also added a new one for the Dual PL8 charger (I totally want one!)
http://www.revolectrix.com/Calculators_main.htm
So i've had a venom pro charger for about 2 years now and it's served me well. To fully charge a 3s it's taking about an hour, I'd like to speed that up just a little bit. Also, now that I've got more batteries and I've moved up to running an occasional 4s, I'd like to have something a little...
i just found the paper work on my dad buying a new 66 charger. AND the window sheet. sales code.
1. xp29 zz1 s6e Dodge charger-8-2dr sport coup 3,128.00 mfg suggest retail price
2. 61 383 cu. in. engine 2 bbl 69.75
3. 318 delete std stripe
4. 395 torqueflite transmission 216.20
5. 411 air...
So after the first time I took my batteries out of my Octane I knew I had to change the setup. Trying to get everything crammed in there was a huge pain in the ass. I took matters into my own hands and did this easy modification.
What you need:
2 x Servo Extensions
Soldering Iron
Solder
Heat...