D3MON
Hardcore RCTalk User
I Have a thread for my first MGT so I figured id start a thread for the newly acquired one that i am going to be fixing back up and get back to working order.
off the bat the truck is missing a shock per corner, it is missing the spur, luckily i had bought an extra RRP for the first MGT, and missing a few wheel hexes (probably from shipping as it was kinda sup par shipping but it is a large truck.
transmission still does have reverse, so going to get a FOC for that, or figure out the tube and pin lengths and make one.
rims and tires, they are 14mm hex and i have no idea what they are, they are about 4.5" rim diameter, and about 6.5" tall. i definitely want something smaller. (may go truggy/muggy type build).
has RPM front upper and lower A-Arms, happy about that.
engine is a .21R, has decent compression surprisingly, hardly any pinch though but given how old these are and it was definitely run a few times.
servos seem to be stock (has a duratrax sx100 for the forward/reverse)
only came with a receiver, it is a 2.4ghz 4ch but no marking as to what brand on it.
and for some reason it has a different set of motor mount holes in it? its right up against the chassis rails so i have no idea what they were planning but oh well.
oh and best part is the cool prop it has on it!
(no joke its a propeller)
hope to get this thing running soon!
Thanks guys for checking it out!
-D3MON
off the bat the truck is missing a shock per corner, it is missing the spur, luckily i had bought an extra RRP for the first MGT, and missing a few wheel hexes (probably from shipping as it was kinda sup par shipping but it is a large truck.
transmission still does have reverse, so going to get a FOC for that, or figure out the tube and pin lengths and make one.
rims and tires, they are 14mm hex and i have no idea what they are, they are about 4.5" rim diameter, and about 6.5" tall. i definitely want something smaller. (may go truggy/muggy type build).
has RPM front upper and lower A-Arms, happy about that.
engine is a .21R, has decent compression surprisingly, hardly any pinch though but given how old these are and it was definitely run a few times.
servos seem to be stock (has a duratrax sx100 for the forward/reverse)
only came with a receiver, it is a 2.4ghz 4ch but no marking as to what brand on it.
and for some reason it has a different set of motor mount holes in it? its right up against the chassis rails so i have no idea what they were planning but oh well.
oh and best part is the cool prop it has on it!
(no joke its a propeller)
hope to get this thing running soon!
Thanks guys for checking it out!
-D3MON
Last edited: