********** CLOSED THREAD *********
** Created new thread with itemized photo's/descriptions of what is now available **
********** CLOSED THREAD *********
I've had my revo for quite some time now and the longer I have it, the less it gets used. I took it out recently (two weeks ago) and bashed it around a bit, but it just doesn't give me the joy it once did. So, instead of seeing it rot on a shelf, I figured I'd ask and see if anyone was in need of a revo and all the support parts they could need?
I'm going to sell it without electronics/radio/battery, but will include the 18TM that's in it. Along with all spare parts I have on hand (which is quite a list).
Highlights and things I remember having:
On the truck:
RPM arms all around
RPM knuckles
Avid revolutions bearings on axles
18TM ~4 gallons through it, runs great
3.3 chassis
P2 rockers/rods
Fantom natural revo pipe
1/8th filter (cobbled, have stock neck with OS 1/8th filter somewhere)
Engine bay stiffener plate
1/8 scale clutch/bell (modified chassis to slide trans forward 1/4 inch to fit)
Trinity rear aluminum skid
Spares:
2 new diffs
Stock arms
Front skids
P3 rockers/rods
P2 rockers
Used shocks
Shock springs
Fistful of spare axles
Reverse parts (includes stripped gear that made me remove it)
Optidrive thingy
Spare misc trans gears (two speed/two speed shaft)
Spurs (not sure of tooth count)
NE leaner BB kit
2.5 chassis, cracked by engine bay area. Small, but cracked nonetheless.
I'm sure there are other parts/pieces I'm forgetting. If there is serious interest, I'll tear it down, itemize everything and post pics as needed.
I'm figuring it's worth around $250 shipped USA only, at least thats what it's worth to me to clean it up and see it go. But that will be mildly negotiable.
I don't have a 3.3 chassis body. I ran half bodies only. I do have a 2.5 body, but it doesn't fit. I can include either a almost new set of HPI dirt bones on t-maxx rims painted yellow or a used set of traxxas sportrax on traxxas sport maxx rims.
Let me know guys.
EDIT: I would also sell for $170 shipped US without the engine.
Pics:
You would have to use your imagination a lot. These are pics of how it sits now, but you will have to visualize the lack of electronics and ignore the dirt .
With pics:
I will not sell a dirty truck. But I also will not clean one that I don't sell... Unless absolutely necessary. You will get "clean" pics prior to money changing hands.
My other reason for selling is because I have intentions on getting a buggy again... having the jato reminded me what it was like to have something that you could zip around with and make your MT bashing buddies stare in awe... Once I have a buggy, this thing will get thrown into a box and never get looked at again.
** Created new thread with itemized photo's/descriptions of what is now available **
********** CLOSED THREAD *********
I've had my revo for quite some time now and the longer I have it, the less it gets used. I took it out recently (two weeks ago) and bashed it around a bit, but it just doesn't give me the joy it once did. So, instead of seeing it rot on a shelf, I figured I'd ask and see if anyone was in need of a revo and all the support parts they could need?
I'm going to sell it without electronics/radio/battery, but will include the 18TM that's in it. Along with all spare parts I have on hand (which is quite a list).
Highlights and things I remember having:
On the truck:
RPM arms all around
RPM knuckles
Avid revolutions bearings on axles
18TM ~4 gallons through it, runs great
3.3 chassis
P2 rockers/rods
Fantom natural revo pipe
1/8th filter (cobbled, have stock neck with OS 1/8th filter somewhere)
Engine bay stiffener plate
1/8 scale clutch/bell (modified chassis to slide trans forward 1/4 inch to fit)
Trinity rear aluminum skid
Spares:
2 new diffs
Stock arms
Front skids
P3 rockers/rods
P2 rockers
Used shocks
Shock springs
Fistful of spare axles
Reverse parts (includes stripped gear that made me remove it)
Optidrive thingy
Spare misc trans gears (two speed/two speed shaft)
Spurs (not sure of tooth count)
NE leaner BB kit
2.5 chassis, cracked by engine bay area. Small, but cracked nonetheless.
I'm sure there are other parts/pieces I'm forgetting. If there is serious interest, I'll tear it down, itemize everything and post pics as needed.
I'm figuring it's worth around $250 shipped USA only, at least thats what it's worth to me to clean it up and see it go. But that will be mildly negotiable.
I don't have a 3.3 chassis body. I ran half bodies only. I do have a 2.5 body, but it doesn't fit. I can include either a almost new set of HPI dirt bones on t-maxx rims painted yellow or a used set of traxxas sportrax on traxxas sport maxx rims.
Let me know guys.
EDIT: I would also sell for $170 shipped US without the engine.
Pics:
You would have to use your imagination a lot. These are pics of how it sits now, but you will have to visualize the lack of electronics and ignore the dirt .
With pics:
I will not sell a dirty truck. But I also will not clean one that I don't sell... Unless absolutely necessary. You will get "clean" pics prior to money changing hands.
My other reason for selling is because I have intentions on getting a buggy again... having the jato reminded me what it was like to have something that you could zip around with and make your MT bashing buddies stare in awe... Once I have a buggy, this thing will get thrown into a box and never get looked at again.
Last edited: