It seems like the SCT410.3 has been around for a long time. The platform came out in 2015, and had been on my "bucket list" of RCs to get. When Tekno lowered the price on their RCs this year, I knew it was time to jump onboard.
Thread was started for collective sharing, input, thoughts... just general discussion of the platform.
Specifications:
TKR6106 Orange LF Springs
TKR6114 Green LF Springs
TKR6018 composite shock caps (built to emulsion) OR TKR8702 Aluminum Emulsion Shock caps
TKR8027 Shock Stand Offs
TKR6051 8x1.3 pistons (drilled to 1.4mm)
TKR8104 .4 Bellcranks
TKR8100 .4 Ackerman Bar
TKR5545B HRC (High Roll Center) Hubs
TKR5163 V2 Aluminum Hinge Pin Brace "C Block" (others can stay composite)
Thread was started for collective sharing, input, thoughts... just general discussion of the platform.
Specifications:
- Length: 530mm
- Wheelbase: 323-335mm
- Width: 296mm
- Weight: ~2850g (6.3lb) out of the box RTR
- (RTR weight equipped w/ Tekin RX8, Pro4 motor, 300g battery, rx, etc)
- Diff Ratio: F/R – 10/40t, Center – 44t
- Battery tray dimensions: 50x148mm
- Kit/RTR: Kit
Full Product Description can be found on Tekno RC's website...HERE.
In order to run the latest recommended team setup, you need the following optional parts:TKR6106 Orange LF Springs
TKR6114 Green LF Springs
TKR6018 composite shock caps (built to emulsion) OR TKR8702 Aluminum Emulsion Shock caps
TKR8027 Shock Stand Offs
TKR6051 8x1.3 pistons (drilled to 1.4mm)
TKR8104 .4 Bellcranks
TKR8100 .4 Ackerman Bar
TKR5545B HRC (High Roll Center) Hubs
TKR5163 V2 Aluminum Hinge Pin Brace "C Block" (others can stay composite)
Last edited: