Decided to do a modular mini crawler course- don't have the room to do one of those epic courses seen online... DRAT!
I used some 3/8" ply for the base and 1" foam insulation for the layers, all foam glued together. $18 in so far.
First module is 1' x 2' with an elevation of 9". There are three approaches to the top- a 35, 45 and a 55 degree one. At the top will be posts for a bridge to the next module. The bottom uncut layer will have some whoop-de-doos carved in.
After the glue sets up I'll start fine carving and testing before I cover it with plaster cloth and texturing.
Any tricks or suggestions are greatly appreciated, this is my first attempt at doing one.
I used some 3/8" ply for the base and 1" foam insulation for the layers, all foam glued together. $18 in so far.
First module is 1' x 2' with an elevation of 9". There are three approaches to the top- a 35, 45 and a 55 degree one. At the top will be posts for a bridge to the next module. The bottom uncut layer will have some whoop-de-doos carved in.
After the glue sets up I'll start fine carving and testing before I cover it with plaster cloth and texturing.
Any tricks or suggestions are greatly appreciated, this is my first attempt at doing one.