Oggydoggy'n'doggydaddy
RCTalk Racer
- Messages
- 105
- Reaction score
- 139
- Location
- Pennsylvania
- RC Driving Style
- Racing
- Crawling
- Scale Builder
- Boating
2wd rod racer custom built on scx10-2 chassis (has waaaay too much torque snaps engine plates reaches 78mph when it doesn't until it breaks) project temporarily abandoned until solution is found
Custom 3d printed transmission
All metal gears final drive at tail is 1:30 paired to the stock 4:2.5 rear
Cummins 12v engine housing with titan t55 motor direct drive16t gear to a 24t worm with a dry clutch (keeps the trans from blowing apart had it happen 6 times till i figured it out)
Stock rear gearing for everest 10 with upgraded metals
Metal drive line
Front steering is completely custom single leaf ford styled suspension of the late models
Rear is spring and leaf for stiffness
Battery is a 1200mah 2cell compact that hides in the flatbed box
Stretched crawlers still on the rear got drags on the front but not unburying it now
Panda6x6 doesn't get used much
Hbx devastator with 74 gmc body
Stock
Carisma coyote (project in the works)
Scx24
Upgraded to high clearance links added some weight and a hardbody custom suburban
Some pics of the first indoor course and we plan to rebuild it
Some still in parts
Scx10-3
Tamiya stadium racer
Scx24
Scx10-1
Deadbolt
Plans
Custom pulling trucks
Kid wants to do demolitions
And maybe some more crawlers might get a couple drift or maybe some tractors idk
Extended
The second times the charm...made the axle house 1/4 inch thick and she made it to 78.3mph once on a 2s then broke the engine house plate on the way back i assume i cracked the plate on launch after 7 rebuilds of it getting thicker it was dangerously close to the edge
Mooore
Custom 3d printed transmission
All metal gears final drive at tail is 1:30 paired to the stock 4:2.5 rear
Cummins 12v engine housing with titan t55 motor direct drive16t gear to a 24t worm with a dry clutch (keeps the trans from blowing apart had it happen 6 times till i figured it out)
Stock rear gearing for everest 10 with upgraded metals
Metal drive line
Front steering is completely custom single leaf ford styled suspension of the late models
Rear is spring and leaf for stiffness
Battery is a 1200mah 2cell compact that hides in the flatbed box
Stretched crawlers still on the rear got drags on the front but not unburying it now
Panda6x6 doesn't get used much
Hbx devastator with 74 gmc body
Stock
Carisma coyote (project in the works)
Scx24
Upgraded to high clearance links added some weight and a hardbody custom suburban
Some pics of the first indoor course and we plan to rebuild it
Some still in parts
Scx10-3
Tamiya stadium racer
Scx24
Scx10-1
Deadbolt
Plans
Custom pulling trucks
Kid wants to do demolitions
And maybe some more crawlers might get a couple drift or maybe some tractors idk
Extended
The second times the charm...made the axle house 1/4 inch thick and she made it to 78.3mph once on a 2s then broke the engine house plate on the way back i assume i cracked the plate on launch after 7 rebuilds of it getting thicker it was dangerously close to the edge
Mooore
Attachments
-
received_278397653383290.jpeg203.3 KB · Views: 37
-
received_2007271946072773.jpeg179.4 KB · Views: 31
-
received_257263658908247.jpeg297.8 KB · Views: 36
-
received_299801361150956.jpeg221 KB · Views: 38
-
received_262949388321905.jpeg129.5 KB · Views: 42
-
received_1343115882548404.jpeg171.5 KB · Views: 36
-
received_572822253625354.jpeg141.6 KB · Views: 40
-
received_683239372533392.jpeg211.7 KB · Views: 40
-
received_606261770020749.jpeg206 KB · Views: 41
-
received_1084767115336461.jpeg154.2 KB · Views: 38
-
received_586950205339451.jpeg194.5 KB · Views: 38
-
20220709_233313.jpg149.3 KB · Views: 35
-
20220725_204544.jpg188.5 KB · Views: 37
-
Screenshot_20220728-103530_Messenger.jpg544.9 KB · Views: 37
Last edited: