psunitro
Hardcore RCTalk User
- Messages
- 2,042
- Reaction score
- 0
- RC Driving Style
I really hate to do this, but I only raced 2 times all of last year, and I dont see myself having a lot of time this coming year.......
This will be sold as a package, or a roller will go 1st, then I will part out. It is DIRTY, I know it is harder to sell a dirty car, but I just decided to sell and I wanted to do a complete tear down.
$500
Jammin FTE
Nice custom painted body
Collari B3 w/ Nocer head(3 gallons), Werks clutch carbon shoes(1 gallon TOPS) VG compression 13t bell
086 pipe
053 pipe
ACE digi heatsink steering servo DS1015 201 oz,.108 sec
http://www.amainhobbies.com/product_info.php/cPath/3_423_436/products_id/5733
Hitec 625
http://www.servocity.com/html/hs-625mg_ultra_speed.html
1 set(of 4) new Panther Komtos on used white dish
1 set new Crimes(not glued) with used white dish
1 set Jammin rippers(10 mins runtime) on white dish(not the BEST glue job)
1 set Crimes on white spoke 85% Tread still VG
1 set Crimes on blackrims 80%
2(total) new Panther kII's on red dishes with 2 red dish rims.
Some Panther glue bands, extra arms,any extra 1/8 stuff I have.
This buggy does NOT have the original shocks, it has another Ofna set. Does NOT have the CF servo tray, I machined a alum one in its place. It does need a wing, its beat. Could use a set of motor mounts, the ones on it are WELL used,but useable. And the screws that hold the mounts on are not the low profile ones. I may be able to score a setup if needed.
http://i20.photobucket.com/albums/b246/psunitro/indytruggy010-1.jpg
http://i20.photobucket.com/albums/b246/psunitro/indytruggy035-1.jpg
http://i20.photobucket.com/albums/b246/psunitro/indytruggy036-1.jpg
http://i20.photobucket.com/albums/b246/psunitro/indytruggy037-1.jpg
http://i20.photobucket.com/albums/b246/psunitro/indytruggy038-1.jpg
http://i20.photobucket.com/albums/b246/psunitro/indytruggy039-1.jpg
http://i20.photobucket.com/albums/b246/psunitro/indytruggy040.jpg
This will be sold as a package, or a roller will go 1st, then I will part out. It is DIRTY, I know it is harder to sell a dirty car, but I just decided to sell and I wanted to do a complete tear down.
$500
Jammin FTE
Nice custom painted body
Collari B3 w/ Nocer head(3 gallons), Werks clutch carbon shoes(1 gallon TOPS) VG compression 13t bell
086 pipe
053 pipe
ACE digi heatsink steering servo DS1015 201 oz,.108 sec
http://www.amainhobbies.com/product_info.php/cPath/3_423_436/products_id/5733
Hitec 625
http://www.servocity.com/html/hs-625mg_ultra_speed.html
1 set(of 4) new Panther Komtos on used white dish
1 set new Crimes(not glued) with used white dish
1 set Jammin rippers(10 mins runtime) on white dish(not the BEST glue job)
1 set Crimes on white spoke 85% Tread still VG
1 set Crimes on blackrims 80%
2(total) new Panther kII's on red dishes with 2 red dish rims.
Some Panther glue bands, extra arms,any extra 1/8 stuff I have.
This buggy does NOT have the original shocks, it has another Ofna set. Does NOT have the CF servo tray, I machined a alum one in its place. It does need a wing, its beat. Could use a set of motor mounts, the ones on it are WELL used,but useable. And the screws that hold the mounts on are not the low profile ones. I may be able to score a setup if needed.
http://i20.photobucket.com/albums/b246/psunitro/indytruggy010-1.jpg
http://i20.photobucket.com/albums/b246/psunitro/indytruggy035-1.jpg
http://i20.photobucket.com/albums/b246/psunitro/indytruggy036-1.jpg
http://i20.photobucket.com/albums/b246/psunitro/indytruggy037-1.jpg
http://i20.photobucket.com/albums/b246/psunitro/indytruggy038-1.jpg
http://i20.photobucket.com/albums/b246/psunitro/indytruggy039-1.jpg
http://i20.photobucket.com/albums/b246/psunitro/indytruggy040.jpg
Last edited: