Exploded view of the PICCO .26 (P3-Monster/Ofna/Wasp)

[Skela]

Here is the exploded view of the Picco P3 Monster which is identical with the Ofna/Picco .26 and the Orion Wasp .26
The numbers on this view are the original Picco numbers.
For the big quest about the silver or black MSN needle I can say when you order the needle directly from Picco they sent you the black one

 

[Error401]

Outstanding find Skela! Good info also. I still wonder why the Ofna mill comes with the silver needle (mine did and it sucks), carb replacement fixed mine.

 

[solidpain]

your photo is no longer there i have a picco max 0.26 and need to change the ball bearings in the motor inner and outer but the LHS do not carry and can not order the needed parts was wondering is anyone hows a company that has the bearings i need the inner is 13x24x6 and outer is 7x17x6 thx

 

[MGT8.0owner]

your photo is no longer there i have a picco max 0.26 and need to change the ball bearings in the motor inner and outer but the LHS do not carry and can not order the needed parts was wondering is anyone hows a company that has the bearings i need the inner is 13x24x6 and outer is 7x17x6 thx

this thread is 6 years old..not likly that you will get a reply

 

[Skela]

this thread is 6 years old..not likly that you will get a reply

i still have the picture... just moved to another place
http://bonetracker.dk/rc/div/piccoP3-monster.JPG

But to the case, there is nothing special about the bearings in the p3 monster. You or your LHS should easy be able to find a new set with those measurements. Take a look on RB, Werks, OS or other well known brands and there should be some in their replacement parts to 0.21 and up that will fit.

even just try find a new Picco 0.21 engine part list, the change that the bearings are the same it big, even look at Team Orion’s CRF, that is also a picco based engine.

Haven’t measured the ones in my CRF yet, but it looks the same when I had mine open.

quick update..
your metric measurement is a bit off, it should be a 7x19x6 mm and 14x25,4x6mm if its for a p3
and the same as almost any picco, os or rb engine.

but amains got it here if you are looking
http://www.amainhobbies.com/index.php/cPath/1_68_235

and if still in any doubts here is a exp pic of a picco 28 with the same bearing numbers
http://www.cmldistribution.co.uk/diagrams/Picco Engines/P3-28.pdf

if its for the special traxxas version you can just use the ones from the rb engine, rb made in the same format as far as i know
http://www.amainhobbies.com/product_info.php/cPath/1_68_360/products_id/8585
http://www.amainhobbies.com/product_info.php/cPath/1_68_360/products_id/8588

 

[Dreaux]

I have been looking for the parts list and exploded view of this motor

F

O

R

E

V

E

R

!
!
!
!!!!!!!!!!!!!!!


I have mostly race mils (ninja, vspecs) but love this motor!!!!! IT IS A BEAST!! and the one i have is probably 5 years old and just put a new rod in and i am chassing a leak right now (it's over 300 degrees) but i am so glad i found this exploding view. I now know the proper head shims and can get the proper o rings etc.

i would like to get a new P/S for this motor. Where can i get parts for this? They are VERY hard to find for this particular motor. Will any ofna .26 work?? I don't think so. But maybe someone can help me out with this question who knows for sure?

 

[johnnysniper]

i need a underhead/button head for this engine anybody know wear i can get 1 from or anybody got 1

 

[speedingbulletbp]

Sorry to break it to you jonny, but these posts are back into may of 09, not sure how actively these guys are online.

 

[TGL]

Do you have a Picco P3 .26 or a P3 .28?
If it's a .26....
I'm not sure if these parts are compatable with the P3, but the Picco 26 Outlaw engines share parts with the older 51214 engine and current (2007/2008) 26 engines like 51223, 51224. Given how long these parts have been around and the variety of .26 engines they fit I wouldn't be surprised if this would work.

Take a look at this:
http://www.nitrohouse.com/catalog/p...12903&osCsid=bc7102617d954aacf27b841042e91a69

 

[speedingbulletbp]

Yeah I already posted that same part to him in another thread, my guess is that it would fit, but does nitrohouse ship to the UK? Thats where he said hes from

 

[alien13]

Holy Necro Batman!