2wdMod
RCTalk Talkaholic
So this has been the road block to many of my custom projects over the years.. build a cool chassis and then can't find any suitable donor tires in the correct scale etc.. So here is my basic method for casting 2 part silicone or Urethane tires using some 3 d printed molds and some non toxic craft grade PLATINUM CURE silicone.. Has to be the platinum cure 2 part , the single part silicones in a tube or caulk gun are NOT suitable , they leach chemicals that will leave a residue on the track surface where the platinum cure non toxic does NOT , so on with the video..