Quinster
RC Newbie
- Messages
- 11
- Reaction score
- 0
- RC Driving Style
I just purchased an Aftershock and I have been having problems. I set the low speed screw by pinching the hose and the revs go and then it shuts down, as is stated in the manual.
I try to set the high speed and when I get it going at medium/low speed it seems to run fine as long as I don't squeeze the throttle too much, if I do, it starts to bog down/slow down/or stall. Even at high speed it seems to bog down periodically, and again, if I don't let off the trigger it will stall.
Any help would be appriciated.
I try to set the high speed and when I get it going at medium/low speed it seems to run fine as long as I don't squeeze the throttle too much, if I do, it starts to bog down/slow down/or stall. Even at high speed it seems to bog down periodically, and again, if I don't let off the trigger it will stall.
Any help would be appriciated.