- Messages
- 556
- Reaction score
- 921
- Location
- Western Washington
- RC Driving Style
- Bashing
- Crawling
- Scale Builder
Got the body together enough to give it a run last night. Bumpers are friction fit still and not hard mounted. The canopy slots in and has no attachment at the moment, although it stays on just fine unless it ends up on it's side.
Still lots of work to do but for the first body I've printed and modded I'm happy with the initial results. I'll run it all until failure before doing any final prints. Inside is a spaghetti factory right now since all the light wiring is temporary. Co-worker that does all our electrical work at the shop will probably have a stroke if he sees it.
Short video of it hitting the woodpile.
Body is based on the AheadRC Mighty FC design, custome bumpers, mocked up bed skirts, and canopy.
Still lots of work to do but for the first body I've printed and modded I'm happy with the initial results. I'll run it all until failure before doing any final prints. Inside is a spaghetti factory right now since all the light wiring is temporary. Co-worker that does all our electrical work at the shop will probably have a stroke if he sees it.
Short video of it hitting the woodpile.
Body is based on the AheadRC Mighty FC design, custome bumpers, mocked up bed skirts, and canopy.