- Messages
- 964
- Reaction score
- 1,468
- Location
- Idaho falls, ID
- RC Driving Style
- Bashing
- Crawling
- Scale Builder
- Flying
I built this chassis using injora’s capra clone and scx10/10ii drivetrain. I turned my scx24 into the micro version and i really like it, it’s unstoppable! Anyway here’s a breakdown of what i built it with:
- Tekin Gen3 21.5T motor (yeah its only a 2pole and i will probably install a different rotor)
- HW 10BL120 -because they are affordable- changed to the RS gen2 because it was the same price on eBay and works way better
- Injora 3-gear transmission (the AX10 type?)
- SCX10ii links from amazon (the rod ends suck so i used revo ends as well)
- injora driveshafts (so far so good)
- KYX front axle with SOA
- SSD pro44 rear axle
- JConcepts Scorpios & foams (so far so good, I may cut some tread out but I'm still testing)
- Injora 1.9 chanquish beadlocks (Good for the price) also have some longer offset wheel hubs for this wheel type
- 115mm shocks from some amazon brand, using rc4wd RRD soft springs and 35wt oil (not bad, just need to find a better o-ring for the top cap)
- direct power servo from amazon (not as fast as it probably should be) the servo horn is bent so that sucks
- 3S 4100mah hobby star battery from rcJuice that shoehorns into place
I may add an interior piece from the Capra however, it is really convenient to unplug from the window
- Tekin Gen3 21.5T motor (yeah its only a 2pole and i will probably install a different rotor)
- HW 10BL120 -because they are affordable- changed to the RS gen2 because it was the same price on eBay and works way better
- Injora 3-gear transmission (the AX10 type?)
- SCX10ii links from amazon (the rod ends suck so i used revo ends as well)
- injora driveshafts (so far so good)
- KYX front axle with SOA
- SSD pro44 rear axle
- JConcepts Scorpios & foams (so far so good, I may cut some tread out but I'm still testing)
- Injora 1.9 chanquish beadlocks (Good for the price) also have some longer offset wheel hubs for this wheel type
- 115mm shocks from some amazon brand, using rc4wd RRD soft springs and 35wt oil (not bad, just need to find a better o-ring for the top cap)
- direct power servo from amazon (not as fast as it probably should be) the servo horn is bent so that sucks
- 3S 4100mah hobby star battery from rcJuice that shoehorns into place
I may add an interior piece from the Capra however, it is really convenient to unplug from the window
Last edited: