nitropro
RC Newbie
Sorry for the slightly late reply, but any progress updates? And how is it to drive? The last question is would you recommend getting one- as it looks serious fun.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Sorry for the slightly late reply, but any progress updates? And how is it to drive? The last question is would you recommend getting one- as it looks serious fun.
Have you tried a different compound rear tire?
Try drag race concepts kenetic or TMRC drag foam. These should help you with your traction issues. Use a 1.5 × 2.75 tire.Also make sure if you are using the set screw plastic hubs to notch a flat spot on each side of the rear axle that the set screws tighten down on to.As of yet, nope. Haven't had good enough weather to test, been pretty cold. I do have some sticky goo to put on them though.
Pretty cool build
I am just starting to build mine. Can you recommend an engine that will fit this car? It seems that there are very few out there that are built and information is quite scarce. What kind of front tires did you upgrade to?
Johnny what clutch did you use with that 0S 12 for the funny car? No one seems to know nothing about .12 nitros?I would go with a .12 engine on these cars. You can put any smallblock on there, but anything larger than .12 has too much torque, IMO. These cars weigh 2lbs or so. You want something that can rev high, so north of 35k rpm would be the best bet.
The front wheels/tires are Dragrace Concepts - https://www.amainhobbies.com/dragra...a-lock-front-wheels-black-2-drc-2001/p1367070
Johnny hate to bother you but can you guide me on the clutch setup you are running with the OS 12? Having great difficulties here… thanks buddy
Johnny I got the hot racing 3 shoe clutch on the shaft now just one more question I promise what clutch bell did you use nothing seems to fit on my end?I would go with a .12 engine on these cars. You can put any smallblock on there, but anything larger than .12 has too much torque, IMO. These cars weigh 2lbs or so. You want something that can rev high, so north of 35k rpm would be the best bet.
The front wheels/tires are Dragrace Concepts - https://www.amainhobbies.com/dragra...a-lock-front-wheels-black-2-drc-2001/p1367070
Johnny I got the hot racing 3 shoe clutch on the shaft now just one more question I promise what clutch bell did you use nothing seems to fit on my end?