cbaker65
RCTalk VIP
is that for the sixe of the rip cord? because I still have it. I just need a spring.
So when you took the starter off ,there was no spring inside or the spring was just broke?
Usually if the spring breaks ,that is a sign of pulling it too far out ,an it breaks at the hook end of the spring!
If the hook part breaks ,that can be fixed by bending another hook in the spring ,but you can't just bend it cold ,
the end that needs to be bent has to be heated so it doesn't snap when you make the bend ,I had fixed a lot of springs
on multiple starters!
If there is no spring ,you can always buy a pull starter off of a different brand ,if that brand unit does not fit ,you can
pull the spring out an use it in your starter housing ,as I am not sure if they sell a spring by them self!...