- Messages
- 970
- Reaction score
- 1,481
- Location
- Idaho falls, ID
- RC Driving Style
- Bashing
- Crawling
- Scale Builder
- Flying
I've built a tekno DB48 from a 2nd or 3rd hand EB48.3, and I now need to buy some tires. 2.2" stuff is pretty much out of the picture since its just more expensive than a 2.8 pre-mount tire. If cash was no object I'd go straight for the U4 G8 hyrax 2.2" tire on the SC raid wheels. 5.75" tall by 2.2" wide. A nice lookin tire for sure. Since i have a 17mm hex vehicle, i would need the hex adapter set from proline, putting me at about $130, and maybe some closed cell foams for the ballooning effect, = more $$$$.....
So here I am at the 2.8 MT stuff.......
https://www.teknoforums.com/threads/tenacity-db48-3.2596/post-21550
This is my set of choices right now. check out the thread.
seriously check out my build thread!
So here I am at the 2.8 MT stuff.......
https://www.teknoforums.com/threads/tenacity-db48-3.2596/post-21550
This is my set of choices right now. check out the thread.
seriously check out my build thread!
Last edited: