RustlerDood
Gone - bye bye.
- Messages
- 349
- Reaction score
- 0
- RC Driving Style
For .12 I just run the first 4-5 tank fulls of gas very rich and never exceed 1/2 throttle and keep the temps around 200.....besides that I just let the mill idle and adjust to get a good idle while putting the truck around at a nice easy pace.............I plan on using 30% in my buggy mill unless someone presents a good reason to use 20% as I have a couple gallons of O'Donnell 20% in my garage...race blend of course.
Oh yes and I have been told I need to get a heat gun such as the following:
http://www.homedepot.com/prel80/HDU...ID=cccfadddjgljmedcgelceffdfgidgmk.0&MID=9876
or if that link does not work a heat gun from home depot @29.99 with temp. range of 750-1,000 degrees....I think that should do the trick ehh plus a fully charged starter box.
Oh yes and I have been told I need to get a heat gun such as the following:
http://www.homedepot.com/prel80/HDU...ID=cccfadddjgljmedcgelceffdfgidgmk.0&MID=9876
or if that link does not work a heat gun from home depot @29.99 with temp. range of 750-1,000 degrees....I think that should do the trick ehh plus a fully charged starter box.