lamelogin
RC Newbie
I'm 99% done building the RC10 Car and I'm looking at this center diff with teeth and my sloppy cables.. Does anyone sell a diff cover? Would the B64 Center Bulkhead cover work? (ASC92046)
Buggy: RC10B74.1
Buggy: RC10B74.1
Welcome to RCTalk
Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
When people refer to the RC10 they generally are talking about the original 2WD Buggy Gold Pan
All newer variants refer to postfix B74, there are tons of 3D printed spur gear covers out there:
https://www.ebay.com/itm/334278065824
All newer variants refer to postfix B74, there are tons of 3D printed spur gear covers out there:
https://www.ebay.com/itm/334278065824
- Messages
- 5,979
- Reaction score
- 9,901
- Location
- Baltimore
- RC Driving Style
- Bashing
- Racing
- Crawling
- Scale Builder
I used the one bill linked above.
There is also files on thingiverse and print it out yourself.
I seen a lot of people talk about b64, b6.4, B74 and B7 in my help groups.
I always get confused if they are asking about a b64 or a b6.4 as sometimes, they forget the dot in the middle.
Now with the new B7, they should not go up to a B7.4 as I would get it confused with the B74.
Race models can be quite hard sometimes.
I use to use that center diff cover when I started out. Don't use it anymore. Adds on weight. And I leave my wires short so they don't come in contact with the spur gear. If you leave your wires lengthy, then yes I'd use it.
There is also files on thingiverse and print it out yourself.
Yes
I seen a lot of people talk about b64, b6.4, B74 and B7 in my help groups.
I always get confused if they are asking about a b64 or a b6.4 as sometimes, they forget the dot in the middle.
Now with the new B7, they should not go up to a B7.4 as I would get it confused with the B74.
Race models can be quite hard sometimes.
I use to use that center diff cover when I started out. Don't use it anymore. Adds on weight. And I leave my wires short so they don't come in contact with the spur gear. If you leave your wires lengthy, then yes I'd use it.
Last edited:
