Plaidfish
RCTalk VIP
Supporter
Well I have decided to just sell a lot of stuff....see if anything strikes your fancy.....PM offers.....thanks for looking
First Gorrila Maxx:
CF gorrilla maxx chassis ver. 2...Gorrilla single speed conversion UE Idler gear....RRP Slipper (new discs 1 run on em)
Novak HV maxx ESC with extra cooling fan, 4.5 HV motor
All RPM arms / Towers / Knuckles
Mip all 4 corners....Traxxas rear turnbuckles / Lunsford fronts....
1/8 scale diffs / ACnC Bulkheads / Kyosho 777 rear Shocks all around (I have another set of white adn Blue springs to set all 8 shocks up) / Pro-Line steering kit....new Revo hubs andWheels (2 packs run on em).....
JR 8611 260 oz steering servo.....easily 1000 invested probably more
NO RX or RADIO
asking 500 shipped to lower 48 but we can negotiate.......
Next is an XB8 original Xray buggy....still runs smooth as silk...just rebuilt the diffs and replaced all the bearings in the driveline....comes with a bunch of spares and tons of adjustmt spacers....Extra set of 777 shocks (not pictured).....I can finish reassembling if you want or leave it in this state if you prefer to tear the rig down....Engine still has loads of compression
Nova Rossi P-5 w/ JP-1 pipe...spare O.S. 2050 pipe as well....pics are a lil dirty...just road dust from test runs out front...
JR 8611 Steering Servo
Futaba S9451 Steering Servo
Spektrum RX
4 sets ofwheels 2 almost new 2 about 75-80%
Spare bodies...New Proline Wing unmounted....I'll include new Fule Tube as well
just bind RX to your Spektrum radio and set EPA and go
Asking 400 shipped OBO
E-maxx Rollcage...fits the 2.5 model
25 shipped OBO
14mm Revo / Maxx 40 series bowties like new
30 shipped SOLD
Engine Pipes
O.S. 2050 w/ header SOLD
HPI ribbed pipe 20 shipped
the other 2050 & JP-1 pipes in pic are included with buggy
Box of old brushed motors and the case...there's a few mod motors for 1/10 TC racing...some stock class motors that just whoop ass too...
25 shiped (the main box and all the single motor boxes are worth that)
Novak Smart Tray NIB still has plastic wrap on box
25 shipped
KO Propo digital Servo 30 shipped case has hole but does NOT AFFECT operation....great for TC steering servo...
Torque: 6.0V:111.1 oz-in (8.00 kg-cm)
Speed: 6.0V:0.08 sec/60° SOLD
HiTec HS-645MG 25 shipped SOLD
23mm 40 series Proline Cheyenne rims 20 shipped SOLD
USED Wabash 23mm 40 series wheels with Bowties the rims where painted and the guy glued em to the paint...I've been fixing them as they came unglued....60-70% tread left...needs touching up on the glue 25 shpped...SOLD
TC3, TC4, TC5 or any freaking ghetto looking thug Touring Car you want to put these spinners on.....just used for shelf queening and putting around the house.....30 Shipped
NTC3 heavy Duty sway bar kit...I ran one of these on the rear of mine to help it drift....never mounted the front one and sold my NTC3....12 bucks shipped
First Gorrila Maxx:
CF gorrilla maxx chassis ver. 2...Gorrilla single speed conversion UE Idler gear....RRP Slipper (new discs 1 run on em)
Novak HV maxx ESC with extra cooling fan, 4.5 HV motor
All RPM arms / Towers / Knuckles
Mip all 4 corners....Traxxas rear turnbuckles / Lunsford fronts....
1/8 scale diffs / ACnC Bulkheads / Kyosho 777 rear Shocks all around (I have another set of white adn Blue springs to set all 8 shocks up) / Pro-Line steering kit....new Revo hubs andWheels (2 packs run on em).....
JR 8611 260 oz steering servo.....easily 1000 invested probably more
NO RX or RADIO
asking 500 shipped to lower 48 but we can negotiate.......
Next is an XB8 original Xray buggy....still runs smooth as silk...just rebuilt the diffs and replaced all the bearings in the driveline....comes with a bunch of spares and tons of adjustmt spacers....Extra set of 777 shocks (not pictured).....I can finish reassembling if you want or leave it in this state if you prefer to tear the rig down....Engine still has loads of compression
Nova Rossi P-5 w/ JP-1 pipe...spare O.S. 2050 pipe as well....pics are a lil dirty...just road dust from test runs out front...
JR 8611 Steering Servo
Futaba S9451 Steering Servo
Spektrum RX
4 sets ofwheels 2 almost new 2 about 75-80%
Spare bodies...New Proline Wing unmounted....I'll include new Fule Tube as well
just bind RX to your Spektrum radio and set EPA and go
Asking 400 shipped OBO
E-maxx Rollcage...fits the 2.5 model
25 shipped OBO
14mm Revo / Maxx 40 series bowties like new
30 shipped SOLD
Engine Pipes
O.S. 2050 w/ header SOLD
HPI ribbed pipe 20 shipped
the other 2050 & JP-1 pipes in pic are included with buggy
Box of old brushed motors and the case...there's a few mod motors for 1/10 TC racing...some stock class motors that just whoop ass too...
25 shiped (the main box and all the single motor boxes are worth that)
Novak Smart Tray NIB still has plastic wrap on box
25 shipped
KO Propo digital Servo 30 shipped case has hole but does NOT AFFECT operation....great for TC steering servo...
Torque: 6.0V:111.1 oz-in (8.00 kg-cm)
Speed: 6.0V:0.08 sec/60° SOLD
HiTec HS-645MG 25 shipped SOLD
23mm 40 series Proline Cheyenne rims 20 shipped SOLD
USED Wabash 23mm 40 series wheels with Bowties the rims where painted and the guy glued em to the paint...I've been fixing them as they came unglued....60-70% tread left...needs touching up on the glue 25 shpped...SOLD
TC3, TC4, TC5 or any freaking ghetto looking thug Touring Car you want to put these spinners on.....just used for shelf queening and putting around the house.....30 Shipped
NTC3 heavy Duty sway bar kit...I ran one of these on the rear of mine to help it drift....never mounted the front one and sold my NTC3....12 bucks shipped
Last edited: