OGOverkill
RCTalk Basher
- Messages
- 45
- Reaction score
- 152
My son (8) and i have decided that our next project would be a custom 6x6. Figured it would be a good next step in his RC hobby and a great test of my patience teaching him to use a lathe and an air brush.
Parts list so far:
- IERC 6x6 frame
- Exo Alpinist dual rear output transmission (back axle will pass through a carrier bearing vs the middle axle)
- HH Puller pro V2 2200 motor (take off from my Phoenix)
- Castle mamba ESC (take off from my Phoenix)
I was hoping to find one of the old Axial SCX6 UMG10 6x6 bodies, but they apparently do not exist so i am still looking.
I do need help with axles though, i will be doing 6 wheel steer to help with maneuverability on this lengthily beast.. I have narrowed it down to 3 options.
- Vanquish F10 Portals
- KYX SCX10: https://kyxmodel.com/collections/ax...x10-small-pamkin?_pos=10&_fid=12efe8efe&_ss=c
- KYX Capra: https://kyxmodel.com/products/c-9?_pos=2&_sid=e4b5fb3cc&_ss=r
Parts list so far:
- IERC 6x6 frame
- Exo Alpinist dual rear output transmission (back axle will pass through a carrier bearing vs the middle axle)
- HH Puller pro V2 2200 motor (take off from my Phoenix)
- Castle mamba ESC (take off from my Phoenix)
I was hoping to find one of the old Axial SCX6 UMG10 6x6 bodies, but they apparently do not exist so i am still looking.
I do need help with axles though, i will be doing 6 wheel steer to help with maneuverability on this lengthily beast.. I have narrowed it down to 3 options.
- Vanquish F10 Portals
- KYX SCX10: https://kyxmodel.com/collections/ax...x10-small-pamkin?_pos=10&_fid=12efe8efe&_ss=c
- KYX Capra: https://kyxmodel.com/products/c-9?_pos=2&_sid=e4b5fb3cc&_ss=r