Is there a tutorial for SEALING the trx 3.3 ?

[knall]

Thanks, I have it mostly apart..... just wanna make sure I am not forgeting anything before I put it back together.

Plastic backplate (EZ START) will be RTV

carb throat will be RTV

all 3 needles will be coated with silicone past on the O-rings

Am I saposed to remove the METAL plate behind the palstic backplate?

 

[Scrogg]

Thanks, I have it mostly apart..... just wanna make sure I am not forgeting anything before I put it back together.

Plastic backplate (EZ START) will be RTV

carb throat will be RTV

all 3 needles will be coated with silicone past on the O-rings

Am I saposed to remove the METAL plate behind the palstic backplate?

It's a good idea to, while you have the engine that far down, go ahead and remove the backplate and inspect the engine thoroughly. Then seal it up!
No need to seal the EZ start plastic backplate. It has nothing to do with the engine's interal workings.

 

[charliejp]

Lots of tutorials on Youtube

 

[RC Addict]

Check out Squirrlod's videos on YouTube. LOTS of info from that guy!

 

[Rolex]

Excellent tutorial in this thread, in the General Nitro forum.

https://www.rcnitrotalk.com/forum/showthread.php?t=60832