stsguy
RC Newbie
- Messages
- 1
- Reaction score
- 0
I need help identifying this old pan car.
Thank you for the help
Thank you for the help
Welcome to RCTalk
Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
9x19
Hardcore RCTalk User
Lifetime Supporter!
Supporter
Military Veteran
Hospitality Award
Build Thread Contributor
Looks like DavidB did the soldering, 
but I have no idea on the car-maker.
but I have no idea on the car-maker.
Here's the best I can come up with. Start there.
https://www.redrc.net/2008/11/chris-doseck-joins-full-throttle-racing/
https://www.redrc.net/2008/11/chris-doseck-joins-full-throttle-racing/
tntpoof
Whats Up Doc?
- Messages
- 4,415
- Reaction score
- 2,285
- Location
- Taylor Michigan
- RC Driving Style
- Bashing
- Racing
- Flying
- Boating
rear motor mount shock says AE to me.but then there are other things that say Schumacher..Id remove all electronics . decrude. solder it and clean each solder joint and use some new age solder with a hot iron 75w+( i can see many different solders on that thing )
Believe it's an FTR 12. Full Throttle Motorsports. The 10 is a little different. AE didn't cut the battery slots the same.
tntpoof
Whats Up Doc?
- Messages
- 4,415
- Reaction score
- 2,285
- Location
- Taylor Michigan
- RC Driving Style
- Bashing
- Racing
- Flying
- Boating
ftr used a single screw to mount mm shock...
Panko75
RCTalk Champion
- Messages
- 184
- Reaction score
- 373
Looks like an old pan car, old enough to have a Novak esc and a brushed motor.
