AC48
Hardcore RCTalk User
Hey,
I am getting out of the hobby and all my rides must go. I need the cash for my new 1:1 ride. First up is my Revo 3.3. It has a RB .23 and a bunch of other mods which I will list. The chassis is in great condition, and so is the engine. The head has some scratches, but theres about a half gallon on the mill and it runs great. One wheel hex stripped out so I superglued a new hex in, but I bought some new wheels just in case which are included. No opti-drive is included, as I planned to do a FOC on it. The reverse gear in the tranny is shot, but both forward gears are just fine...all the more reason to do the FOC. It has a custom throttle linkage set up in order to get WOT. Both servos have make-shift mounts for the horns. The steering has a broken chunk of screw in the threads, so I used a glob of solder to hold on the horn for now. The throttle servo has the wrong thread screw in it, but it holds just fine. It has been like this for a while, and neither horn ever comes off. Also, the tuned pipe is bent, but still works fine. The EZ-Start wand is broken, just the tip, wires are still connected and it works just fine. I think thats all the issues, now heres the good:
RB TM523 engine w/pipe.
HS-5645MG
HS-5625MG
Hot Racing aluminum Shock ends
Teckno RC wing mount
HPI Hellfire Wing
Proline single steering aluminum arm
HD Servo Saver spring
Stock radio w/batteries
EZ-Start battery included
NIB Extra pair of wheels
Stock 3.3 engine included, with about a half gallon on it.
1 Gallon +/- on the chassis
With a FOC this truck would be at 100% funcionality, but obviosly it needs a little tlc in a few areas. Considering the cost of the RB engine, I'd like to get $315 plus shipping for the truck.
Post, PM, or email to [email protected] with any questions. More pics available upon request.
Thanks,
AC48
I am getting out of the hobby and all my rides must go. I need the cash for my new 1:1 ride. First up is my Revo 3.3. It has a RB .23 and a bunch of other mods which I will list. The chassis is in great condition, and so is the engine. The head has some scratches, but theres about a half gallon on the mill and it runs great. One wheel hex stripped out so I superglued a new hex in, but I bought some new wheels just in case which are included. No opti-drive is included, as I planned to do a FOC on it. The reverse gear in the tranny is shot, but both forward gears are just fine...all the more reason to do the FOC. It has a custom throttle linkage set up in order to get WOT. Both servos have make-shift mounts for the horns. The steering has a broken chunk of screw in the threads, so I used a glob of solder to hold on the horn for now. The throttle servo has the wrong thread screw in it, but it holds just fine. It has been like this for a while, and neither horn ever comes off. Also, the tuned pipe is bent, but still works fine. The EZ-Start wand is broken, just the tip, wires are still connected and it works just fine. I think thats all the issues, now heres the good:
RB TM523 engine w/pipe.
HS-5645MG
HS-5625MG
Hot Racing aluminum Shock ends
Teckno RC wing mount
HPI Hellfire Wing
Proline single steering aluminum arm
HD Servo Saver spring
Stock radio w/batteries
EZ-Start battery included
NIB Extra pair of wheels
Stock 3.3 engine included, with about a half gallon on it.
1 Gallon +/- on the chassis
With a FOC this truck would be at 100% funcionality, but obviosly it needs a little tlc in a few areas. Considering the cost of the RB engine, I'd like to get $315 plus shipping for the truck.
Post, PM, or email to [email protected] with any questions. More pics available upon request.
Thanks,
AC48
Last edited: