Sold / Found Cheap Servos

Welcome to RCTalk

Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Status
Not open for further replies.

Racer 1966

What are we doing today?
Supporter
Build Thread Contributor
Messages
8,238
Reaction score
270
Location
Joplin, MO
RC Driving Style
  1. Bashing
Still needing funds for my 1:1 truck project - so here's some more stuff for cheap. This time it's servos :yes:

1. Hobbico CS-170, used and has a couple of partial broken ears, SOLD

SPECS: Speed: at 4.8V = .19 sec @ 6V = .15 sec
Torque: 4.8V = 250 oz-in (18 kg/cm)
6V = 333 oz-in (23.97 kg-cm)
Length: 1.59" (40.6mm)
Width: .79" (20.3mm)
Height: 1.5" (38.1mm)
Weight: 2.18oz (61.8g)
Lead Length: 10" (254mm)

2. Futaba S3305, used and all good ears SOLD!

SPECS: Dimensions: 1.6 x 0.8 x 1.5" (40 x 20 x 38mm)
Weight: 1.7oz (1-11/16oz) (47g)
Speed: 0.25 sec/60° @ 4.8V - 0.20 sec/60° @ 6V
Torque: 124 oz-in (8.9 kg-cm) at 6V - 99 oz-in (7.1 kg-cm) at 4.8V

3. Ofna SX-0001, used and all good ears

SPECS: L:1.54" x W:0.79" x H:1.42"
Speed :.22 sec/60°
Torque: 56.9 oz-in

4. Team Associated S2008MG,new pullled off my SC8 SOLD!

SPECS:Length: 1.59" (40mm)
Width: .79" (20mm)
Height: 1.42" (36mm)
Torque: 111 oz/in
Speed: 0.20 seconds at 60°

5. Team Associated S1903,new pulled off my SC8

SPECS:Length: 1.59" (40mm)
Width: .79" (20mm)
Height: 1.42" (36mm)
Torque: 41 oz/in
Speed: .19 seconds at 60°

6. Identical to #5 above

7. Traxxas 2055, used and all good ears, from a Stampede but was last on my son's Slash

SPECS:Length: 1.6" (40.5mm)
Width: .8" (20.5mm)
Height: 1.43" (36mm)
Torque: 80 oz/in
Weight: 1.58oz (45g)

8. Traxxas 2018,used from a T-Maxx and has 1 broken ear

SPECS:Length: 1.59"
Width: 0.77"
Height: 1.58"
Torque: 42.0 oz-in
Transit Time: 0.22 seconds/60 degrees
Weight: 1.5 oz

9. Airtronics Super Micro 94091,used and all good ears

Specs: Weight 0.32 oz
Dimensions 0.91 x 0.44 x 0.87 in
Torque 18 / 23 Oz In @ 4.8 / 6.0 V
Speed 0.12 / 0.10 sec @ 4.8 / 6.0 V

The Hobbico is Sold,take all of the rest for $50 shipped! I will split them up,the Futaba S3305 and the Associated S2008MG $10 each,$5 each for the others. Thanks!

servos.jpg
 
Last edited:
Status
Not open for further replies.
Back
Top