tomyknoker
RCTalk Basher
- Messages
- 67
- Reaction score
- 0
- RC Driving Style
Hi all... well the saga continues. I bought a new Glow Igniter, and managed to start the car... the first 10 seconds were good, then the car reved beyond belief almost falling off the starter box, I managed to stop it by covering the exhaust however the temperature of the engine reached 330°F... this is using the EXACT settings that are specified in the manual of 2 1/2 turns out from the bottom on both the lo and hi-speed needles,
I'm now completely stumped here as I want to get this car going but don't want the engine to completely fry, if it hasn't already!
I'm now completely stumped here as I want to get this car going but don't want the engine to completely fry, if it hasn't already!