K kensrichard1 RC Newbie Messages 3 Reaction score 0 RC Driving Style Aug 10, 2014 #1 I have a blade 130 Xthe gear from the main shaft fell off for the tail rotor. I put it back on and it seems to not stay there what am I doing wrong
I have a blade 130 Xthe gear from the main shaft fell off for the tail rotor. I put it back on and it seems to not stay there what am I doing wrong
Rolex Hoof Hearted In Memoriam Supporter Military Veteran Build Thread Contributor Messages 35,105 Reaction score 1,763 Location In my recliner RC Driving Style BashingFlying Aug 10, 2014 #2 http://www.horizonhobby.com/pdf/BLH3780-Manual_EN.pdf See page 16. You have a shaft driven tail, and the gears are pressed onto a crimp, or spline on the ends of the shaft. Most likely the inner hub has stripped on the gear that comes off and needs to be replaced.
http://www.horizonhobby.com/pdf/BLH3780-Manual_EN.pdf See page 16. You have a shaft driven tail, and the gears are pressed onto a crimp, or spline on the ends of the shaft. Most likely the inner hub has stripped on the gear that comes off and needs to be replaced.
K kensrichard1 RC Newbie Messages 3 Reaction score 0 RC Driving Style Aug 10, 2014 Thread starter #3 Ok thanks. do they sell those gears and metal
Rolex Hoof Hearted In Memoriam Supporter Military Veteran Build Thread Contributor Messages 35,105 Reaction score 1,763 Location In my recliner RC Driving Style BashingFlying Aug 10, 2014 #4 Sure. Check Horizon Hobby or Ebay. Just look up the make and part #.