nateb26
RC Newbie
- Messages
- 13
- Reaction score
- 0
- RC Driving Style
Hi there, new to the site, my ez start system is causing me major headaches. I just got a new glow plug two days ago and my truck started up within seconds and was running fine. Today its a different story. It doesn't want to start at all. It keeps turning over but wont fire up. New glow plug, fresh gas, EZ start starter is fully charged up and both lights (glow plug and motor) are lighting up, there is fuel in the fuel line with no air bubbles, the flywheel has resistance at tdc when being turned, it is not flooded - (took all the steps that I know of to insure that it is not flooded), the HSN is set at 2.5 turns loose from the tightest point, LSN hasnt been touched since it was running three days ago. The carb has at least a mm of space when IAC is closed (or the brake is on) I put a link in here to a youtube video of what its doing if it helps diagnose this prob. I really dont know what else to do, any help is much appreciated.....
http://www.youtube.com/watch?v=1wIpFHut_Ug&feature=youtu.be
http://www.youtube.com/watch?v=1wIpFHut_Ug&feature=youtu.be