Found this model and finally got the 3d printer to work right came out decent but it’s leaned (can't really tell in the photo) if anyone has any recommendations on what to print for the crawlers please let me know
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
It's like an ocd coming on. Add one thing, then next thing you know it has you.Forgot my favorite TRX4 part. It's part of what is inspiring me to do an interior in the TRX4 Sport Camper. I love the way it looks when I'm taking a low video and I nose off something and as the tail comes up I see the tank under it.
https://www.thingiverse.com/thing:3585637
View attachment 157839
Thanks so muchI meant to get you some links last night and went to bed with a headache.
I've printed most of these and they printed well in Overture PLA plus/pro.
Random Accessories https://www.thingiverse.com/thing:2858187
Wheel nut covers and wheels I'm currently running are from this guy. He has some good files.
https://www.thingiverse.com/goodsons_hobbies/designs
Traction boards I'm using. If I remember right they were a little flimsy so when I sliced them I scaled the thickness up 10% and it worked perfect.
https://www.thingiverse.com/thing:2861626
I've never got around to painting it but this printed really well at a .1 layer and 30mms. Coleman stove
https://www.thingiverse.com/thing:3526450
Bed rack, not wild about the square "tubing" but it has held up really well. Also the Textured panel I put under it. I think the headache rack looked bad so I used the low crossbar instead.
bed rack https://www.thingiverse.com/thing:3523999
diamond plate bed cover https://www.thingiverse.com/thing:4259558
I printed these screen/mirror assemblies for the side windows but never installed them. They printed really well
https://www.thingiverse.com/thing:4210775
Hadn't seen this Jet Ski and trailer before. May have to give it a go.
https://www.thingiverse.com/thing:3613339
I figured out why it got screwed up and the extruder got loose some how want loose 3 days ago and I thightened the belt, 60mm/s I’m printing at@Addict Rc - Check your belt tension. You can see in the vertical ribs of the cooler, your printer is not handling the changes in direction as well as it should, which is also causing your layer lines that you see in the print.
What speed did you print that at? Printing at higher speeds can also cause these issues, even on printers with proper belt tension.
Warning - if you tighten your belts too much, they will break mid-print. You want them to sound a little like a low guitar string when you "strum" them, but you don't want to go too tight.
I think I’m going to have to print one of thoseForgot my favorite TRX4 part. It's part of what is inspiring me to do an interior in the TRX4 Sport Camper. I love the way it looks when I'm taking a low video and I nose off something and as the tail comes up I see the tank under it.
https://www.thingiverse.com/thing:3585637
View attachment 157839
Thanks I think I’m going to paint it to look like a real ColemanCooler looks good!
That'll do it. Try printing one at 40mm/sec and see what you think. I used to print everything at 60. But I have lately been running between 30-40. It makes for much nicer prints. I only use 60 when I don't much care how it looks.I figured out why it got screwed up and the extruder got loose some how want loose 3 days ago and I thightened the belt, 60mm/s I’m printing at
That'll do it. Try printing one at 40mm/sec and see what you think. I used to print everything at 60. But I have lately been running between 30-40. It makes for much nicer prints. I only use 60 when I don't much care how it looks.
It's like an ocd coming on. Add one thing, then next thing you know it has you.
Truck looks great.
Painted it and printed a Jerry can but I put it on the side next time I’m printing it vertically
View attachment 157898
View attachment 157899
Both
I printed a similar jerry can. You should be able to print that vertical, with no supports.Painted it and printed a Jerry can but I put it on the side next time I’m printing it vertically
View attachment 157898
View attachment 157899
Both
I was going to but clicked the wrong file once I get some more white fulfillment I'm printing a yetiI can't believe you didn't print a Yeti cooler, that would be the only size I could afford one! The Coleman looks good!
Yes probably it was originally vertical but I turned it horizontally I’ll try printing it at 35mm/s verticalI printed a similar jerry can. You should be able to print that vertical, with no supports.
Can I see some pictures of them printed next to the crawler please and thanks for the fileThis is the Gerry can file was looking for. https://cults3d.com/en/3d-model/various/off-road-crawler-accessories
It's a pack. I've printed the chainsaw, Gerry can, traction board, wheel chock and mount, farm jack and the crate. All printed very well. View attachment 157921
Can I see some pictures of them printed next to the crawler please and thanks for the file
Printed a propane tank (will print in white when I get it)