Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Discovered this when I took the Clutch Bell and shoes off. Would it be possible to lightly sand of grind that down? for some reason the shoes have a bump of some sort and that has ground against the Clutch Bell.
View attachment 154543View attachment 154544
I'm not aware of any that dont use oil1st. Is the Air filter, is there any material I can use that does not require oil? Would Amain hobbies have what I am looking for? as far as oils and filters.
Nothing wrong with Odonnell's, Thats what I use. 30% nitro and 8% oil. Good stuff.2nd. The Morgon Fuels 'Sidewinder' fuel caught my eye and was wondering if that might be something that would be alright to use. I was using O'Donnell fuel but did not know about the Nitro to Oil percentage mixture.
If your air filter housing looks like the one below then yes, they should fit.Do you think these would fit my air filter enclosure ? for the vx-18 they look about the right size.
https://www.amainhobbies.com/traxxas-air-filter-inserts-foam-3-preoiled-trx-2.5-tra5261/p3341
PS can't find O'Donnell will have to use Sidewinder. Was also wondering if it might be better to just get this instead.
What should I do about the camshaft problem? Do you think that kit on amazon would fit it?educated guess is yes, that air filter kit would fit the carb.
While I do own a few nitros, my main wheelhouse are electrics. I'll leave that answer to @cbaker65 or @gandalfnzWhat should I do about the camshaft problem? Do you think that kit on amazon would fit it?
What should I do about the camshaft problem? Do you think that kit on amazon would fit it?
I did try the ones I had before hand but I understand and thanks.Most 12 to 18 size engines are considered small block an most of those parts you have
shown interchange with each other as far as clutches & those filters ,clutch pilot shafts
may vary in size for different applications ,I've never owned a VX 18 so I am not a 100% sure!
I own small blocks from 12 to 18 sizes an I am able to use different pilot shafts & clutch shoes ,
bells from each other with out issues!
I dont run my small blocks anymore because I have 1/8 scale stuff that I run with big block size
engines ,some big block clutch assembly's will work on small block stuff too!..