Ozarks104
RCTalk Member
Hey guys, sorry for the dumb question but I'm having either spur problems or a slipper clutch. Getting to it. Before my spur stripped out on me i was pulling wheelies easily with my T Maxx and after i replaced a fresh spur its not doing wheelies. I checked the spur. It isn't binding or slipping. Its a nice smooth rotation. I also hammered down the nut for the slipper clutch. So its not slipping. I had it tuned perfectly today before it went out. Now i haven't touched it since the accident but again the temp and humidity was the same. Am i missing something?
Thanks[DOUBLEPOST=1409279719][/DOUBLEPOST]I read this on Traxxas:
You can tell the engine is running rich by noting any of the following:
*Sluggish acceleration with blue smoke coming from the exhaust
I wouldn't say its "Sluggish" but its not doing wheelies…
Thanks[DOUBLEPOST=1409279719][/DOUBLEPOST]I read this on Traxxas:
You can tell the engine is running rich by noting any of the following:
*Sluggish acceleration with blue smoke coming from the exhaust
I wouldn't say its "Sluggish" but its not doing wheelies…
Last edited: