Springs
Got some Team Associated SC10 4x4 springs to test fit on ET410/SCT410SL's shocks.
Got some Team Associated SC10 4x4 springs to test fit on ET410/SCT410SL's shocks.
Last edited:
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Maybe the 3.5lb springs would set you right, and allow a bit of adjustability. As you're sitting, you have no pre-load adjustment other than positive.Stock front springs (4 lb.) are 50mm in length where as the SC10 4x4 front springs are 63mm. Team Associated springs were a perfect fit. On paper, the new springs are a tad bit softer (3.9 lb.) which is what I was after. Maybe I'll order the 3.5 lb. springs to play with. In any case, I'm banking on the new springs breaking-in a bit, but still happy with the ET410's stance:
View attachment 186915
I set all my 4wd RC's front ride heights to "bones level", and my 2wd platform's front ride heights are set to imaginary drive shafts, of course,... "arms level". After springs settle/get broken-in, I'm almost positive my ET410's front end will drop a millimeter or two.Maybe the 3.5lb springs would set you right, and allow a bit of adjustability. As you're sitting, you have no pre-load adjustment other than positive.