Search results

i just wanna know if its ok for the shaft to be exposed like that

325 is freakin high, i would turn ur needle in all the way and take it out about 3 1/2 turns then start over.

if these dont work i had the same problem with mine. the crankcase could be flooded causing nothing to move. u may have to pull the motor or u will damage the piston rod and u''ll be sry

it has been about a month. i am missing out on all of the snow I'm getting here to bash my savage in. senario: pull start broke on my sirio .27 lhs has the pull start on back order. Other pull starts wont fit because the one way bearing on the sirio is f@#$in huge compared to the others. Now my...

can't say much on the wasp, but i would imagin the rpms r higher then on the stocker.

sirio .27 nuff said there is one on ebay but i think hes askin too much. i got mine for 300 w/o tax from my good friend at my lhs

u should invest in a temp gun if your worried about over heating your motor. i believe running temps should not exeed like 190 degrees F. i run around 185 or so. But small blocks r abit different. they tend to run at higher temps then a big block would do to there stroke length and rpms. temp...

If I'm not mistaken isnt the sirio .27 an 11 port? if it is it certainly doesn't cost $500 dollars. or are u talkin about an 11 port SMALL block? as for nitrous, its stupid to get, within a couple bottles u will be replacing the piston and sleeve, u can get plenty of power and speed through the...

in my hyper 7 i started it up at the race track and dropped it down and it went backwards due to the motor running the wrong way. it stalled within a 60 seconds and i started it back up and it was fine. u cannot run the motor backwards while its on the truck or buggy or car. if its a straight...

well, i dont use road rage tires, but i do use masher 40 series tires and they dont slow me down. all depends on your gearing and powerplant ( sirio .27 ) :devil: still deucin wheelies . get a cold air intake too off ebay. they help alot

i paid $240 for the sirio .27 w/o tax cause i know the guy at my lhs so well. or its because i dump so much money into my r/c trucks he just cuts me breaks all the time.

man i gotta get pics on here. recently threw a sirio .27 on my savage. kicked ass. but after that i went on ebay and ordered a cold air intake for my savage with a K&N air-filter. Not only does it sound nice but it increases the performance of the motor. ANd i thought i had the problem with nose...

well the reason most people like the savage is because there stock tranny/drive train is very strong out of the box. has mostly aluminum gears in the tranny and has dogbones. One of the first things i did was put some CVD's on the rear and throw some heavy duty dogbones on the front cause those...

you know what i need that my lhs doesn't have.i wheely bar

yeah that sounds like a good idea, i think i will check it out with the 18t on there.

yeah, b4 i had my stock savage tires on which are smaller then my 40series proline tires, it would take like aquarter throttle and the savage would just flip on its ass with little ease. i thought i would solve it by puting on the bigger tires, but its still wont bog my sirio .27 down. I would...

well what i did was put on larger and heavier tires that helped alittle bit, it still jukes the front end up with no problem. i was thinking of puting an 18t cb on there but i dunno yet.

is the truck stock first of all? cause i got a sirio .27 in mine and i have trouble keeping the front end down even with a half of throttle. but if it is stock, then stiffen the rear springs and see what you can get out of it. Also make sure your motor is tuned really well. I'm not sure if the bb...

:breakdown aight thanx for the info :constipat

how long should it take to break in a motor? MINE TOOK ME 1-WEEK............................ I have had so much bad luck lately, i think god hates me. I go to put in my sirio .27, i took out my stock motor and broke the clutch springs, over to lhs. I put in the sirio .27, go to fire it up...