Axial AX10 Scorpion Crawler Outrunner Moter Plate
One of the heaviest components on the Axial AX10 Scorpion rock crawler is the engine. Axial has designed the transmission to place as much weight as low as possible the motor still remains heavy. So Axial has developed a new part which will help decrease the weight of the motor by allowing you to run lighter motors, an outrunner style motor.
The Axial AX10 Scorpion outrunner moter plate is sized to allow you to use the small lightweight outrunner motors. The new Axial outrunner motor plate replaces the stock motor plate and can be easily installed. The Axial AX10 Scorpion outrunner moter plate is also made from 2.5mm 6061 aluminum for added rigidity and light weight.
Axial 2.2 Rock Lizard Tires (Race Compound)
Axial’s popular Axial 2.2 Rock Lizard Tires just got better. Now available in the softer stickier race compound, the Axial 2.2 Rock Lizard Tires (Race Compound) tires allow more flex and stick better to most surfaces.
Axial 2.2 Rock Lizard Tires (Race Compound) Features:
- Aggressive side bite for better traction in off camber situations
- Realistic looking tread pattern
- Center lug pattern has lots of surface bite
- Race Compound – Softer and stickier than stock compounds
- Inside diameter: 57mm
- Outside Diameter: 132mm
- Width: 56mm
Axial B-17 Betty Body
New from Axial, the popular B-17 body is now available uncut in .040″ polycarbonate plastic to withstand the toughest abuse with a clear overspray film, vinyl window masking and pre-cut decals are included. The Axial B-17 Betty Body includes a wing with mounting hardware for enhanced performance. The Axial B-17 Betty body will fit the HPI Savage, Traxxas T-Maxx and Traxxas E-Maxx monster trucks with the marked post mounting holes. Minor modification will allow this body to fit on other monster trucks currently on the market.
Axial AX10 Scorpion Rock Crawler
In the past if you wanted to have a competition ready rock crawler you had to buy piece by piece and hope they fit together. Well good bye yesterday hello today, Axial has just introduced their new Axial AX10 Scorpion Rock Crawler Kit and this thing was designed around competition in mind.
The AX10 Scorpion axles have been specially designed with features not normally found on other rock crawlers. Everything from the axle strength, pinion angle, caster, and ground clearance were taken into consideration, the result is a stronger better axle that will outperform the rest. An aluminum diff locker is even included along with hardened drive shafts and axles.
Axial 2.2 Rockster Rock Crawler Beadlocks
If you’re into R/C Rock Crawling then the Axial 2.2 Rockster Rock Crawler Beadlocks are just what you have been looking for!
The Axial 2.2 Rockster is designed to fit the most popular rock crawler tires now out on the market, the Axial 2.2 Rockster beadlocks come ready to mount to any 2.2 rock crawler project you may have.
Axial Posts and Spacers
GO GREEN! Axial now offers a selection of aluminum spacers and threaded posts. Whether working on that custom project or just wanting to add more wow factor to your car these are what you need.
- M3 Threaded Posts
- Axial green anodized
- Threaded posts range in size from 10mm~70mm
- Sold in pairs
- M3 Spacers
- Axial green anodized
- Spacers range in size from 0.5mm~6mm
- Sold in packs of 6
For more information visit: www.axialracing.com
Wheely King Body – Mini GT-1
The Mini GT-1 is a direct replacement for the Wheely King, but with some creativity it should fit many of the popular new smaller scale monster trucks on the market. Molded in crystal clear polycarbonate material for those that prefer to have a personal touch with their paint and graphics scheme, this body will also take almost any abuse you can throw at it! If detail and great looks is what you are after, the Mini GT-1 for the HPI Wheelie King is the body you have been looking for.
- Photorealistic die-cut premium vinyl decals include window frames, headlight, grille, tail lights and more, plus official logos!
- Overspray film and pre-cut vinyl window masks make painting fast and simple
- A decal instruction sheet is included for decal placement
- The body has dimple marks for body post drill locations
Part Number: 7122 – MINI GT-1 CLEAR BODY
MSRP: $24.00
Talk about the new Mini GT-1 body for the HPI Wheely King in the General R/C Electric Talk forum.
