East End Machining Berg MOA Chassis

September 24, 2009 in East End Machining | no comments

east end machining berg moa chassis

Well it’s finally here. EEM’s first MOA chassis. It has been designed for Berg Axles but can be run with any other MOA style axles on the market.

The design was created and honed by East End Machining Team Driver Lloyd Town. Better known to us all on the boards as Slow-N-Green.

Lloyd has done an incredible job on this design. It is a 2 1/4 in wide aluminum TVP chassis design. It has a modified EEM Double Reverse Triangulation Skid Plate, 4 cross braces, & a Lexan DIG Tray. The chassis is pre-drilled to accept the EEM AX10 Velcro body mount system (SC-008)as well.

Click to continue…

Proline Crowd Pleazer

July 3, 2009 in Pro-Line Racing | no comments

proline-crowd-pleazer-3308-40

Proline has introduced their new rock crawling body, the Proline Crowd Pleazer. The Proline Crowd Pleazer features a low sleek roofline and angled side provides added clearance over those nearly impossible obstacles.

The raised rear deck and hood design on the Proline Crowd Pleazer allows for optimal clearance on the chassis and shock details.

Click to continue…

CKRC Adjustable Berg Chassis

May 7, 2009 in RC News | no comments

ckrc berg adjustable chassis

CKRC has just released their new adjustable rc rock crawling chassis, the CKRC Rock-It chassis! The CKRC Rock-It adjustable berg chassis is a top of the line competition chassis built to perform and take take your Berg into the winners circle.

The adjustability of the CKRC Rock-It adjustable chassis is endless. Ground clearance is adjustable by 1 1/4″! Multiple upper link mounting holes and shock adjustments are made for the true RC Crawling tuner. Shocks from 2.5″ to 5.5″ can also be used.

Click to continue…

Proline 1983 Dodge Ramcharger

May 5, 2009 in Pro-Line Racing | no comments

proline-dodge-ramcharger

Proline Racing has taken one of the most popular Dodge body styles, the Ramcharger and has made it a perfect fit for rc rock crawling on the Axial AX10, Axial SCX10, and Team Losi Cralwer.

Click to continue…

Tamiya 1973 Ford Bronco

May 1, 2009 in Tamiya | no comments

tamiya-1973

The Ford Bronco is a famous American 4X4 off-road vehicle. This 1970’s model was among the first series called “Early Bronco” which were produced during 1965-1977. Three types of bodies were released; the fully-open “Roadster,” the single cabin pick-up “Utility,” and the “Wagon” which had a resin roof.

The body featured triangular protrusions on both sides on the curved front hood which worked well as a guide for drivers to accurately measure the body size while driving. The front suspension features coil springs combined with the rigid axle, which was a first for mass-produced 4X4 vehicles and works well both on-road and off-road. The Bronco is still greatly popular around the world, particularly in America, where many are used as cross-country and rock crawling vehicles.

Click to continue…

Axial AX-10 Ready-To-Crawl

April 20, 2009 in Axial | no comments

axial-ready-to-crawl

Axial is at it again, another RC Rock Crawler. This time a Ready-To-Crawl version of the ever popular Axial AX10 scorpion kit! The new Axial AX-10 Scorpion rc rock crawler is fully ready to rock crawl right out of the box! With the new Axial AX-10 RTC rc rock crawler, Axial has done a lot of things right to improve the basic AX-10 kit.

For starters Axial has added a slipper clutch to reduce gear wobble for a much more efficient drivetrain and also increases the durability of the drivetrain. Axial has also given the Axial AX10 ready to crawl solid rear axle lockouts which improve ground clearance while rock crawling.

Click to continue…

Proline Titan Weighted Wheels

April 16, 2009 in Pro-Line Racing | no comments

proline-titan

RC Rock Crawling fans will love the new wheel just released by Proline Racing, the Titan beadloc weighted wheels! New the Proline Titan wheel comes in an easy 3 piece design as well as 8 oz. of internal add-on weight is included for each wheel!

Proline Racing has also made the Proline Titan beadloc wheels in two different sizes, one for 1/18th scale trucks and for 1/10th scale trucks. The Proline Titan wheel also includes pre-ventilation, aluminum die-cast beadlock, and is available in both black and chrome!

Click to continue…