syphon68
RCTalk Addict
Well I have had this thing for 3 mos now and It has got through many version so I thought it was time to share some pics with you guys
Mamba Max esc
Integy 35 t 18/86
2s 5000 mah
Vanq steering
Axial universals
STR chubs / knuckles
STR links front/rear
castle BEC
Savox SC-1256TG 277 oz
TSL super swampers
Axial beadlocks
2 days old and I waterproofed it and put the vanquish steering on, also had to paint it so it didn't look stock
Another few weeks went by and I made some panels out of .025 Al, installed the STR parts, tires wheels, and was still hating the narrow turning radius.
and shot a little video
[ame="http://youtu.be/M0ZiET95J-c"]http://youtu.be/M0ZiET95J-c[/ame]
---------- Post added at 9:23 AM ---------- Previous post was at 9:22 AM ----------
[/COLOR]Time for a total teardown replace seized bearings twisted shafts and install axles.
Servo and shafts installed
Inspired by some steering links I had from an LST2 I have an idea....
That was quick
Now onto a new roof same Aluminum that I made the side panels out of.
I also moved the battery to the front and the electronics into a project box in the rear.
Got a 3s 5400 in there now and stuffed the drive shafts with some Axial links I cut down. The 35T Integy V11
cooks pretty good I never ran the stock motor took it out immediately and put this one in 3 mos ago so for $36.00 it has been a good option.
last weekend I ran it through the creek and then the Mud all I did was take the hose to the whole truck and it blew it out with air.
Old aluminum Panels
New Shiny Bling - Thinking about sanding more and then clear coat.
Now if I could only make a hood out of the same .025 Aluminum.
Mamba Max esc
Integy 35 t 18/86
2s 5000 mah
Vanq steering
Axial universals
STR chubs / knuckles
STR links front/rear
castle BEC
Savox SC-1256TG 277 oz
TSL super swampers
Axial beadlocks
2 days old and I waterproofed it and put the vanquish steering on, also had to paint it so it didn't look stock
Another few weeks went by and I made some panels out of .025 Al, installed the STR parts, tires wheels, and was still hating the narrow turning radius.
and shot a little video
[ame="http://youtu.be/M0ZiET95J-c"]http://youtu.be/M0ZiET95J-c[/ame]
---------- Post added at 9:23 AM ---------- Previous post was at 9:22 AM ----------
[/COLOR]Time for a total teardown replace seized bearings twisted shafts and install axles.
Servo and shafts installed
Inspired by some steering links I had from an LST2 I have an idea....
That was quick
Now onto a new roof same Aluminum that I made the side panels out of.
I also moved the battery to the front and the electronics into a project box in the rear.
Got a 3s 5400 in there now and stuffed the drive shafts with some Axial links I cut down. The 35T Integy V11
cooks pretty good I never ran the stock motor took it out immediately and put this one in 3 mos ago so for $36.00 it has been a good option.
last weekend I ran it through the creek and then the Mud all I did was take the hose to the whole truck and it blew it out with air.
Old aluminum Panels
New Shiny Bling - Thinking about sanding more and then clear coat.
Now if I could only make a hood out of the same .025 Aluminum.
Last edited: